Originally Posted by martinf79
As always ... go this this site ... plug in the OEM size and put in the specs for the new setup ... will tell you whether the rim/tire setup will work ... no point asking on here, as its dependant on MANY variables ... and sometimes people will give you the wrong info as well (as they are misinformed themselves).
and FYI - you'll be fine upfront w/ a 34 +ET (as OEM is +35). The rears, you'll be 13mm farther out to fender (which may look a bit "off"). Might stick out too much. I'm going w/ a 37+ET, and I'm 9mm out to fender (which a few folks on here have done), and is probably as far out as you would want to go.