Thread: Re Fitment!!
View Single Post
      12-08-2012, 07:58 PM   #4
Andy0323
Private
United_States
1
Rep
51
Posts

 
Drives: F30 328i
Join Date: Dec 2012
Location: OC

iTrader: (0)

Holy stretched batman. 225's on a 10" barrel will be extremely stretched. Are you herrafrushing your ride? Since I don't own an F30, you'll have to do some measurements and report back.

According to my calculations, 19x10 +25 measurements in comparison to a stock 18x8 +34:
Hub to outer barrel lip will extend by +1.35~ inches / +34.4~ mm
Hub to inner barrel lip will extend by +0.65~ inches / +16.4~ mm
Keep in mind, a 10" wheel may not necessarilly be 10" in total width... ie: A 10" Advan wheel is actually 10.5" total width, thus offset and width fine tuning in calculations may be necessary.

First major questions:
1. Do you have enough room within your fenders to house the extra width?
2. Do you have enough camber leverage to slam it and tuck your tires/wheels?
3. Are you willing to roll your fenders?
4. Do you really want to drive like this? (lol... sorry, I had to ask this question).