Quote:
Originally Posted by ewill858
Update: Rebooted PC, disabled as many background apps as possible, and waited after connecting ENET cable until it was done "thinking" about the connection, and communications are up again.
I'm still seeing the Adaptive headlight / Active Blind Spot Detection Malfunctions upon coding the FEM_BODY modules.
The thing that is concerning me at this stage is that even when I reset the module (by applying "code" to the ECU), I still see one or both malfunctions upon completion of the code.
Additional information: I'm coding an F30/335i M-sport with ZDA
One more question: if I want to try restoring all my changes, is there a convenient way to do this efficiently? Or do I have to apply "code" to each ECU that has changed?
Thanks!
|
You can VO Code the entire SVT in one shot. See my post here:
http://www.f30post.com/forums/showpo...postcount=1498
If you have residual errors on you car, you can use Tool32 to try and clear them. See my post here:
http://www.f30post.com/forums/showpo...postcount=1262