View Single Post
      01-04-2013, 05:54 PM   #1780
kon
0
Lieutenant
 
Drives: F30 316i
Join Date: May 2012
Location: Sillypore

Posts: 454
iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
The ACSM SBR Sensor settings on my F10 are all set to nicht_aktiv.

So you have set both of these to aktiv, and the Passenger seat belt status and warnings are not working?
  • Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF= Status - passenger
  • BR_BF_GWF_SBR_BF (aka SeatBeltReminder_SBR_Beifahrer) = Reminder - passenger
The backseat status display, Gurtzustandsanzeige_Fondsitze_GWF_GZAF, works with KOMBI / GURT_FOND_STATUS, which allows you to change the Instrument Cluster Icon between two-persons and three-persons.

Gurtzustandsanzeige_Fondsitze_GWF_GZAF though requires that the backseat physically has seat belt sensors installed, which is standard for European builds, but not U.S. builds. I don't know what Singapore gets, but I am guessing you don't have it either.

Maybe it is possible too that you passenger seat also physically lacks the sensor?
Shawn,

Correct - change all 3, 2 u mentioned plus the pre-warning.

For rear, Ours is effectively an European build car, pretty much the same as uk/Australian car, I'll try the Kombi one later today... Thanks
kon is offline   Singapore
Appreciate 0
Reply With Quote