View Single Post
      02-02-2013, 11:54 PM   #87
Driving Mika all over California.....
bmwluvr24's Avatar

Drives: 2008 E60 M5
Join Date: Dec 2012
Location: San Diego, CA

iTrader: (0)

Originally Posted by Casualvic View Post
Im installing low beam hid soon, where am I going to mount the ballast?? And will it be screwed down or zip tied or ???
The tech at the dealership zip tied mine into the frame work in front of each wheel under the fender well shroud. It is a perfect place as long as you 3m double side tape it and then zip tie all of the wiring up inside. It is very clean as well. You will see what I am talking about once you remove the shroud. Oh yeah, you will need to remove the wheel as well to get a really clear view of what you are doing. My car was on the lift at the shop, so things were easy to see.
2008 E60 M5 Sepang Bronze Metallic, gloss black grills and gills, LED side markers, 12mm spacers all around, stud conversion kit, custom exhaust with Magnaflow mufflers and x-pipe.