View Single Post
      02-24-2013, 09:01 PM   #2794
Yobyot's Avatar

Drives: MY12 F30 ZSL
Join Date: May 2005
Location: Boston

iTrader: (0)

Originally Posted by Frogman View Post
I can't add any more than whats in the "E-Sys - Getting Started Coding - Part 1.pdf" document. You need to follow it EXACTLY.

If you have gotten to the point where you have been able to edit the values, then:

1. save the changes to disk.
2. Press the Back Arrrow button
3. Activate the FA (right click on FA and select "Activate FA".
4. Make sure the correct underlying CAFD file (yellow) line is selected (it may move after activating the FA).
5. Click on Code FDL.

When it's done, make sure the summary window says "0" errors on the title.
A tip: I find that Activating the FA FIRST is less bothersome than doing it when trying to code the FDLs. You can activate the FA anytime -- I do it before I start searching for things to change.
MY12 335i ZSL:
Produced: 2012-06-22; ED: 2012-07-19; Arrived in Jersey City: 2012-08-23; Redelivered: 2012-09-12
MY18 X3 30i:
Produced: 2018-03-15; Delivered: 2018-03-29