Quote:
Originally Posted by shawnsheridan
This is strange, as this CAFD as far as I know is not part of any PSdZData release. 51.3 added cafd_000007a1.caf.005_033_001, which is newer, and the version before it was cafd_000007a1.caf.005_031_003, which is older.
So, what you need to do then is as follows:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on REM => Click on "Detect CAF for SWE" => Select CAFD cafd_000007a1.caf.005_033_001 => Select OK => Right-Click on REM (the ECU itself not the underlying CAFD) => Select CODE.
|
Thanks Shawn, that sorted it.
Another question : do you happen to have the pinout for the USB2 port on the NBT?
I VO-coded 6NS, and I ordered cable 61119322445 (nr. 1
here), which I think runs between USB2 on the NBT and the base plate in the armrest. Instead of connecting to the base plate I'm going to try and solder on a female USB2-port so I will have 2 USB ports in my armrest, one for the iPod for music, and one for the iPhone for apps.
Do you think that will work?