F31 Code For Close Trunk/Boot with Key Fob and Driver Side Button
Hi Guys
I am new to bimmerpost and pretty new to coding for which i have only coded my f31 for bluetooth audio which I was so please with as I know if I would have taken this to BMW they would have probably charged me about £300!
At the moment i can only open my boot with my key fob and the button inside the drivers side. But I have read the F31 can be programmed to also close the boot/tailgate with these same buttons.
I think I have found what i need from a cheat sheet on here to enable this within E-SYS:
HKFM 3010 SCH_FBD aktiv nicht_aktiv Button on key fob will be enabled to CLOSE the trunk
HKFM 3010 SCH_TOEHKI aktiv nicht_aktiv Button on driver-side will be enabled to CLOSE the trunk
But I'm not really too familiar with this path within E-SYS as I have only done the Bluetooth and pretty much found step by step instructions
Would anyone be able to advise on just where to click etc once I have made my connections with E-SYS??
Many Thanks
Dave
|