Quote:
Originally Posted by madriz
After many miles traveled, is there any noise, annoying vibration?
between alignment and alignment does it maintain the curvature?
|
I run the Kmacs with camber plates and have been for while now. there's no noise or vibration. The part is well made and if its installed right, there should be no issues. The bushing doesn't move once its tightened down so the alignment spec is maintained.
However, if you need camber I would start with camber plates first and if you need more, get the KMACs. Most decent plates will get you close to -3 degrees and i doubt you would need more than that. Plus plates are easier to adjust and do not affect the toe alignment as much as the KMACs.