Quote:
Originally Posted by valley_nomad
One more problem: I used to be able to lower the blind spot detection active speed from 50km/h to 30km/h by coding HcSwcCPar_i_Hc2_Aktiv_v_low in ICM module (in 3000 Daten, F8). Now it is no longer there. So I Googled and found that since 2014 it has to be done by coding C_ZSW_Aktivierunggeschwindigkeit_Funktion_low. But I can not find it either. To me this was a very useful feature...:-(
I also found that in "ICM 3000 daten, F8" there are many UNBELEGT (unassigned) and Daten_x_x_x items. It seems a bit unusual.
|
We know CAFD Mapping is no longer valid for this new firmware / CAFD, so I would not trust too much in what you are seeing.