Hello everyone. I notice that in this thread you are getting fabulous things with the rdc. I have a problem but my rdc has stopped working after installing the reversing camera and the kombi 6wb. At the same time, the door remote control has stopped working. I have to press very close to the car to make it work. My car is a cabriolet F33 of July 2014, and it has a receiver antenna, so I suppose that the ecu ddc is integrated into the dsc.
The error in ista says: missing message emitter rdc in receiver icm.
Since the failure of the rdc and the remote control has been simultaneous, it is clear that the rdc sender is the culprit. But it's fine because I exchanged it with another one and it still did not work. The following steps have been:
Update NBT, KOMBI, ICM and TRSVC, but everything remains the same.
I have left to think that the problem is in FEM and DSC that coding can be solved or it would have to be updated.
If someone can help me, I'll thank you very much. I am very lost and tired of seeing the failure notice in the kombi.
Thank you very much.
|