Quote:
Originally Posted by XenaBimmer
Nice work! You do all of that yourself (welding, etc)?
Did you do any adjustments to the stock tailpipes for the 3" tips to fit, other than welding them on?
|
I have a great exhaust shop that I work with! The right side tailpipe was cut about 1 1/2" from the muffler, the pipe was swagged and welded back on. This allowed us to adjust the gap between the 2 tips. A little adjustment in the stock muffler hangers (loosening the hanger where it bolts to the body) and we were able to center the tips in the opening.
Quote:
Originally Posted by _bdiddyb_
Wow! I didn't know they stuffed a cat in the muffler to silence it.
|
I ended up filling 2 1/2 5 gallon bucket with the packing. I was quite shocked how much I pulled out.