View Single Post
      11-22-2012, 02:40 AM   #1262
shawnsheridan
General
shawnsheridan's Avatar
United_States
10310
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by akeresztes View Post
Anyone know how to reset check engine light on F30?

I redid my coding on HUCIC module to resolve the HD radio issue (don't think it was a real issue - my reception may just be poor since it works for some stations and not others that were working earlier on other side of town).

Anyways after fixing that, I did some coding on KOMBI module (playing with HUD settings) and when I started car next time the check engine/emissions light was on. I drove to work and back and car seems fine.

Ill be restoring the KOMBI settings but don't though if that will reset the light. Anyone have any tips on how to do that?
Try this.

Assuming the fault condition no longer exists, to clear the fault code.

1) Launch C:\EDIABAS\Bin\TOOL32.EXE
2) Hit F3
3) Load C:\EDIABAS\Ecu\F01.PRG
4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
5) Hit F5
6) "Results" window should show "JOB_STATUS = OKAY"

Hopefully, Problem Solved.

Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE

Last edited by shawnsheridan; 11-22-2012 at 03:28 AM..
Appreciate 0