|
Heya.
Just did this. I have an F30 with retrofitted M Sport brakes and of course, whoever installed them omitted the SPBR coding.
Thanks for the info guys. Have not test driven it yet as I just finished coding it... But I did find the brakes a bit spongy to be honest.
Will report back regarding what my results are.
Not sure if its mentioned in this post... But I did not go ahead and change the rotor diameter via Esys. I figure if anything there was to be changed, adding the SPBR would have changed it... So I just added HO-WORT SPBR and re-coded my DSC.
Thanks again!
|