Quote:
Originally Posted by shivaswrath
Don't need the bars if you have the M sport line!
Note, installation should be MUCH cheaper without having to install this...
|
Agreed - that's why I wanted the quote b/c I'm willing to spend $2500; $4400 not so much.
I have the Sport line, but my understanding was that both Sport and M Sport have the beefier sway bars. I think the 'M Sport Suspension' is a misnomer b/c it shows up in the VIN decoder as well.
I checked the VIN decoder
here and this is what it says about the suspension:
S704A M Sportfahrwerk | M Sports suspension
So presumably if one of you w/ an M Sport car checked your VIN, it should say the same thing?
Just trying to figure out the best way to prove it to the dealer that I already have the required sway bars. If someone w/ a Sport line who's had the m performance suspension installed could chime in with their experience, that might help too.
Otherwise I know I had read some specs about the thickness of the swaybars (13mm vs 12mm (non sport, non m sport) ..something like that. Need to search some more.
But any more inputs you guys can provide would be helpful. Thanks!