Hi David51, really thank you very much for the reply. Mine is an F06 M6 Gran coupe.
That confuses me a little. I was thinking I needed to get the supply to the black 2 wire connector which is the supply input to the heater control module. (A83*4B). (Left side of photo below)
That is a black 4 pole (2 wired) connector that would go into the column connector A83*4B pins 1&4 if it was populated.
You show a red and yellow wire and a white connector? Also where can I get the female contacts to fit in the airbag connector?
Last edited by doughboy; 09-03-2016 at 03:13 PM..
|