|
OK, I just searched the internet and found out that if you install the retrofit kit from Westfalia, it will not shut off the PDC.
And then you can not code that either.
So like your first idea you need the PDC button.
The problem is that this cable does not exist singly, but only together with the entire retrofit harness.
Maybe someone can find out the individual part numbers for the plug and socket contacts.
I will also try to find out the part numbers
The plug then will be plugged into the PDC button and the 2 wires into the ICM.
wire green/yellow Pin 28
wire yellow/blue Pin 6
|