It's the same coding that happens when you install a CF rear diffuser, the dealer should know about it.
15. Concluding work and coding
The retrofit system is relevant to programming/coding only if the carbon rear diffuser retrofit set is installed.
– Connect the battery
– Connect the battery charger to the car
– Connect the car to the ISTA work shop system
– Call up the ISTA/P car programming facility
– If using ISTA/P, please note the instructions provided in the ISTA/P application documentation
– Retrofit K-word: Select"DSMO"via the-Conversion-path and work through the created action plan
– If necessary, carry out a car test using the ISTA system and note or work through any entered error memory
– Conduct a function test
– Re-assemble the car in a logical manner
– Give the customer the customer information
Last edited by 2kaccordocoupe; 04-24-2017 at 02:32 PM..
|