BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST - View Single Post - Add tire pressure and temperature to the TPMS display

MyFastM3 · 02-01-2014, 02:55 AM

Hi all,

I have coded the following:

F30 HU_CIC 3001 EXBOX RDC_SAFETY aktiv nicht_aktiv Add tire

pressure and temperature to the TPMS display

And I have checked. Disconnected then reconnected to the car re read and check and the setting is set to aktiv.

So this might be a noob question but I assume you see the Temp and Pressure on the NBT under the TPMS settings in the vehicle information.

But I don't see Temp and or Pressure. All I see are all the green tires am I doing something incorrect or am I looking in the wrong place?

02-01-2014, 02:55 AM	#1
MyFastM3 Second Lieutenant 65 Rep 260 Posts Drives: m3 Join Date: Oct 2012 Location: Za iTrader: (0)	Add tire pressure and temperature to the TPMS display Hi all, I have coded the following: F30 HU_CIC 3001 EXBOX RDC_SAFETY aktiv nicht_aktiv Add tire pressure and temperature to the TPMS display And I have checked. Disconnected then reconnected to the car re read and check and the setting is set to aktiv. So this might be a noob question but I assume you see the Temp and Pressure on the NBT under the TPMS settings in the vehicle information. But I don't see Temp and or Pressure. All I see are all the green tires am I doing something incorrect or am I looking in the wrong place?
	Appreciate 0 Tweet Quote