Quote:
Originally Posted by awhk
Have found the following info from the F25 X3 forum regarding disable cold/warm light check for certain bulbs. Useful for replacing the standard incandescent bulbs with LED replacements.
http://x3.xbimmers.com/forums/showpo...2&postcount=18
Since the F30 does not have FRM module, I've ran a search and found something similar to the F25.
In the Frmbody module > 3061 LceLciOutputChannels, 67
TFL_L or R: front LED corona rings L or R
NSW_L or R: front fog lights
FRA_V_L or R: front turn signals
Here are other names in that channels that need to be checked:
AL_L or R: brake lights?
POL_L or R: are LEDs according to the settings, maybe the parking light strips on the tail lights.
FL_L or R: not LED
SML_L or R: not LED
FRA_Z_L or R: most likely mirror turn signals as the setting is set to LED as default
BIX_L or R: name looks like Bi-xenon?
LCI_0: LED
LCI_1: LED
LCI_2: not LED
LCI_3: LED
LCI_4: LED
LCI_5: LED
LCI_6: LED
LCI_7: LED
LCI_8: LED
Settings are similar as well
WARMUEBERWACHUNG - Warm Check
KALTUEBERWACHUNG - Cold Check
IS_LED - Indicate the bulb is LED
|
Any negatives to turning off the checks en masse? I am trying to figure out which one will stop the rear turn signal check.
EDIT: Read some more of the X3 thread, it looks like AL/FL are low beam / high beam. So that really just leaves SML as the possibility, so I'll give that a shot.