BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST - View Single Post - BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

KeenDriver · 01-15-2013, 04:43 PM

I'm running into a few issues when trying to recode anything after the FEM recall with 48.3 and 3.18.4.

For example -

FEM_BODY [40]
cdDeploy ProcessedWithError
cadf_000000794-004-124-042 Not Executable.

I get the same thing in HU CIC
I checked the post below that had a similar problem a few months back and found the SVT appears to looks fine.

http://www.f30post.com/forums/showpo...12324765...357

I'm a bit stuck. I believe I'm on F020-12-11-505. One difference I noticed is that when I update the CAFD I don't get the little yellow dot next to the CAFD that I used to.

01-15-2013, 04:43 PM	#2045
KeenDriver Private 8 Rep 84 Posts Drives: 2013 335i M-Sport Join Date: May 2012 Location: CA iTrader: (0)	I'm running into a few issues when trying to recode anything after the FEM recall with 48.3 and 3.18.4. For example - FEM_BODY [40] cdDeploy ProcessedWithError cadf_000000794-004-124-042 Not Executable. I get the same thing in HU CIC I checked the post below that had a similar problem a few months back and found the SVT appears to looks fine. http://www.f30post.com/forums/showpo...12324765...357 I'm a bit stuck. I believe I'm on F020-12-11-505. One difference I noticed is that when I update the CAFD I don't get the little yellow dot next to the CAFD that I used to.
	Appreciate 0 Quote