Quote:
Originally Posted by BMW3291
Can you explain about wiring and where do you set up the control unit?
Do I need to coding?
I want to try this retrofit on my car F30. It has FTM, production 04/13.
Best regards.
|
The wiring has been already described above. But here again the diagram.
The 2 cables orange/green and green must be pinned in FEM pin 51 and 52.
If you have a trailer coupling, then you can go the short away and wear the cables off in the trunk behind on the right.
The TPMS control unit is attached on the bottom of the tank by the holder 36206852245.
After the installation the coding is needed.