Quote:
Originally Posted by gerbs
I ended up getting a few of them working, had some outdated cafd files so I just grabbed the new versions out of 48.3.
HU_CIC, REM, and KOMBI all coded fine but I had some issues with FEM_BODY -
"[Exception - UNKNOWN] CAF cafd_00000794-004_124_042 does not support FP version 01.00.44"
Code:
Caf's werden gesucht
Tal wird generiert
NCD werden gelesen
FDL CAFD-00000794-04.7C.2A signieren.
Abarbeitung wird gestartet
TAL execution started. [C205]
ExecutionID=2013/02/11-14:51:17.794
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[FEM_BODY - 40] prepareECUforCoding started
[FEM_BODY - 40] prepareECUforCoding finished
[FEM_BODY - 40] authenticateECUforCoding started
[FEM_BODY - 40] authenticateECUforCoding finished
[FEM_BODY - 40 - cafd_00000794-004_124_042] Transaction type: cdDeploy; Message: TA started
[FEM_BODY - 40 - cafd_00000794-004_124_042] Transaction type: cdDeploy; Message: TA finished
[FEM_BODY - 40] finalizeECUCoding started
[FEM_BODY - 40] finalizeECUCoding finished
[Exception - UNKNOWN] CAF cafd_00000794-004_124_042 does not support FP version 01.00.44
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithErrorInTransaction". [C207]
TAL execution finished. Duration: "7s". [C206]
Abarbeitung beendet
|
I'm not sure I had that exact error, but I was able to use 47.8 and pull in the new cafd files from 48.3 into the cafd folder. I also just replaced the KIS folder with that from 48.3 after that no problems with anything.