Quote:
Originally Posted by shawnsheridan
The ACSM SBR Sensor settings on my F10 are all set to nicht_aktiv.
So you have set both of these to aktiv, and the Passenger seat belt status and warnings are not working?
- Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF= Status - passenger
- BR_BF_GWF_SBR_BF (aka SeatBeltReminder_SBR_Beifahrer) = Reminder - passenger
The backseat status display, Gurtzustandsanzeige_Fondsitze_GWF_GZAF, works with KOMBI / GURT_FOND_STATUS, which allows you to change the Instrument Cluster Icon between two-persons and three-persons.
Gurtzustandsanzeige_Fondsitze_GWF_GZAF though requires that the backseat physically has seat belt sensors installed, which is standard for European builds, but not U.S. builds. I don't know what Singapore gets, but I am guessing you don't have it either.
Maybe it is possible too that you passenger seat also physically lacks the sensor?
|
Shawn,
Correct - change all 3, 2 u mentioned plus the pre-warning.
For rear, Ours is effectively an European build car, pretty much the same as uk/Australian car, I'll try the Kombi one later today... Thanks