Quote:
Originally Posted by Discordia
Hi all.
I know this was a year ago but I thought I'd share my experience of this. I successfully coded this on an F80 yesterday and it was pretty easy. No flash required.
I just changed the VO to replace 8KA with 8KL and then VO coded the DME and KOMBI. I also did the HU-NBT and FEM_BODY for good measure but not sure it was necessary.
Of course, I then had to re-do my FDL coding in these modules but that was pretty quick and easy as I had it all recorded.
Nothing changed at first but, after a short drive, the CBS interval updated and it looks spot-on. Last Oil change was 2000 miles ago and it now wants the next in 8000 miles instead of 18000 miles !!!!! Crazy. BMW bang on about how important it is to maintain the vehicle according to their specified schedule and use any failure to do this to void your warranty. And then they set an oil change interval of 20000 miles.
|
I'm new to esys however I'd like to have this coded. What are the steps to doing this if possible. Thanks