Quote:
Originally Posted by Pato808f30
ok guys so im stuck between this two wheels now (the velgens are a maybe at this point) now this are 10 inch rears with ok offsets (mostly on the vorsteiner set) i love the looks of both but im inclining towards vors for quality and weight?they are also flow forged, but the rohanas are great looking and they are rotary forged! any input? i also wanna run a 285/35 on rear for ride quality im thinking to stick with 35 all around since im going coilover setup and ill be able to lower the rear more if need it (dont wanna compromise ride quality with 30s)
http://www.ebay.com/itm/221633442717...84.m1436.l2649
http://www.ebay.com/itm/331516759751...84.m1436.l2649 |
flow forged and rotary forged are the same. cast spokes with spun forged barrels. lighter than straight cast. not as strong as monoblock forged.
the stock tire diameters for f3x's are 26". not sure why you're concerned about ride if you're going with 20's, but 285/35/20 is 27.9" diameter. you are lowering your car but raising it back up due to the tire diameter. the gearing at the wheels is also changed (for the worse) and the increased tire weight and will likely affect your acceleration and braking although i'm not sure how noticeable. speedo and odometer are also affected. however, if you're not concerned with any of this go for it...
i were doing this type of setup, i'd go 20x9 with 255/30 (26" dia.) front and 20x10 with 275/30 (26.5" dia.) rear.
although both choices are nice, i'd prolly go PUR FL04, somebody just got these in another thread.