Quote:
Originally Posted by Sanelko
I bought a (supposedly OEM) headlight lens cover off eBay as well as a special adhesive to go with it. Drivers side headlight cover was cracked from an accident so going to try and replace it. Will see how it is once it arrives...
Be careful sanding and polishing your current headlight. The polycarbonate has UV film over it to prevent it from yellowing - sanding and/or polishing is a sure way to remove this film and cause those sections to haze out in the sun very quickly.
|
Please keep me informed!
I had this car brought over from California and I've should've known the consequences of not being able to have nice cars in NYC..
Now, the far left sensor of the front bumper is in a little bit as well, how could I push that back out? I don't know if that's the reason why but my PDC sound is delayed now (i.e. the red danger warning in the rear is playing the sound of a yellow danger warning sound and the front bumper sensors are really slow and won't make a sound until I'm yellow/red danger close) and this did not occur before someone had scraped my car. My left driver side reflector is also loose, and I can push it in which I'm going to remove the four safety screws to secure it back into place, but what would I do with the PDC? Any suggestions are greatly appreciated.