View Single Post
      01-23-2013, 03:43 AM   #37
pkimM3r
Banned
pkimM3r's Avatar
205
Rep
7,298
Posts

Drives: m3 saloon in granny mode.
Join Date: Dec 2009
Location: lost angeles

iTrader: (0)

Quote:
Originally Posted by utenigma
Quote:
Originally Posted by pkim1079 View Post
Looking for a square setup for the track as well. Some apex wheels. But they havent fit/built any for the new f30 series so gonna have to calculate myself.

They have some 18x8.5 et35/45. Im guessing i can do 35 up front 45 out back with the same tire size. Rotating can be done at a tire shop i suppose since they will only be for the track.

These will be fitting with some coilovers.

Need a better track setup ASAP!
Hmm - if you're going with the same size wheels in the front and back, I might put 10mm spacers on the wheels with et45 (to make them et35)

Reason I say that is the stock square setup (8.0" et34) is the same offset front and back. If you ran the 45's out back with the 35's in the front, the front's would stick out and the rear's would be sucked in by comparison
8.5" et35 should be close enough to stock to fit. It would stick out a little but is negligible. With 245/255 im hoping it would fit. Scottbmw can you chime in and let us know whether or not the bbk was the reason they did not fit? If you had smaller brakes would you have had no fitment issues with 18x8.5et 37 with 255.40 all the way around?? Please let me know thanks. Your pm box was full the other night.
Appreciate 0