Quote:
Originally Posted by dbonline
I took the liberty of roughly comparing some lengths based on the pixel ratios and came up with these speculative dimensions.
My opinion is that these sizes come closer to a 1/2 series than a 3/4 series, supported by various members pointing out the 'tall' guy or smaller car size.
What do you think?
Attachment 782099 |
I was intrigued by your post because I thought I knew why you were miscalculating it. Anyways, you can't measure what you did and call it 19 inches. The outer lip of the rim is NOT part of that. I measured the tire diameter instead since I knew exactly what it was based on the tire size.
I got the same wheelbase as the F30, 111". I still got it being considerably shorter though at 10". I think the F32 will be a bit shorter than the sedan, but not by much. What I think is happening is that the front nose sits out a few inches that we can't see due to the slight angle and I am measuring straight across instead of how they probably will reducing it by a % or so.
It's definitely the F32, though.
