|
Ok, got it done
No need for pry tools, just a 8mm socket and a heatgun...also a pair of gloves
Do not try to do this in cold temps, my first attempt fail cuz the outside temp was around 40-50 degree. I'll say 60 degree and above will be better.
I use the heatgun on low and you have to heat all around the reflector for a good 3-5 minutes. Also a good idea to use a rope to hold the plastic fender. I tie it against the wheel so that it will remain open for access.
Push on the reflector and it will come off, if not keep heating it
__________________
2006 325xi (Sold)
2014 M235I (Current)
2015 428xi Gran Coupe (STB)
|