Hi Svache, just wanted to say thank you very much for this! It's so cool to modify stuff using a laptop
I have built my own cable using an existing shielded Ethernet cable (I believe they call it CAT6) and with a 511 Ohm resistor. It is working like a charm, I do not even get the yellow triangle with the Limited Connectivity message.
The other day I coded the ASS
and when I have time I will do the rear lights as well. Yesterday I was browsing offline, but could not figure out exactly what to set yet as I have werte=14 instead of off. There is also a separate off section
If there are suckers like me that blow the cigarette lighter fuse... The fuse is under the hood at position 66.
Thanks a lot man!