View Single Post
      04-23-2013, 04:15 PM   #3363
jgonzal
Registered
0
Rep
4
Posts

Drives: 550i
Join Date: Jun 2011
Location: US

iTrader: (0)

Quote:
Originally Posted by DVCperformance View Post
Is it possible to change code to allow retracting of side mirrors at any speed?
DVCperformance,

See the following post:

Quote:
If you want to be able to fold the mirrors at any speed, I think you need to change:

FRM>3020 FRM_SPIEGEL_PARAMETER, 10>ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN

The default is werte 14, which I believe is equivalent to 20 Km/Hr. Above that speed you cannot fold the mirrors. I have not tried this, but if you change that value to FF you might be able to fold at any speed.

One potential problem is that the mirrors unfold automatically at 40 Km/Hr. To get around that you might have to change:

FRM>3020 FRM_SPIEGEL_PARAMETER, 10>ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN

The default is to unfold at 40 Km/Hr (Hex (werte) value of 28). You might also want to change this one to FF.

By the way, if anybody wants to automatically "unfold" their mirrors at a speed lower that 40 Km/Hr (25 MPH), just change the last werte parameter to a lower value (for example 6 or 7).
JEG23
Appreciate 0