Quote:
Originally Posted by npgatech
Good point. I will give this a try and confirm for everyone. I am guessing, that the output is there in the inner rear lights, but it is just at 0% duty cycle in PWM.
|
Code:
REM > 3062 > MAPPING_TAGAHRL_H_L_OUTPUT = sl_l
REM > 3062 > MAPPING_TAGAHRL_H_R_OUTPUT = sl_r
REM > 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM > 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM > 3063 > MAPPING_UNIVERSAL_6_PWM_LEVEL_1 = werte=64
REM > 3063 > MAPPING_UNIVERSAL_7_PWM_LEVEL_1 = werte=64
May be this is already general knowledge here, but I just confirmed. After coding these settings, I was able to get all 4 rear pipe lights ON during DRL.
Thanks Frogman for the suggestion
