Quote:
Originally Posted by shawnsheridan
E-Sys requires EDIABAS to run, and is packaged with it. As I wrote above in Post 1262, you can launch Tool32, F01.prg, fs_lesen_funktional job to read fault codes, and FS_LOESCHEN_FUNKTIONAL job to clear fault codes.
|
Shawn,
Maybe you have a link for .PRG files set for F30 from ISTA/P v.48.X or v.47.X, 46.X?
Now I only need dcs_f030.prg or something for diagnostic dcs ecu because f01.prg is not enough for recognise errors.