Quote:
Originally Posted by Tremolo
You could probably fit a 15mm spacer as the wheel will naturally camber (I measured too). But fotios335i has a good point about the longer hub lip.
|
Do either of you know how long the hub lip is on the F30?
Both the 10 and 12 mm spacers on Rogue have a warning:
Note that the hub contour height for use with our 10mm/12mm spacers requires a maximum dimension of 11.5mm. Anything taller (such as rust buildup or dust caps) can damage the spacer or even break off the hubcentric lip machined onto the spacer. Please measure your hub to ensure compatibility before ordering.
Do we know if the hub lip is less than 11.5mm? Either of you measure it?