Quote:
Originally Posted by Frogman
I noticed that too last month when I tried to code someones car with both outer and inner tail lights with DRL.
Did you see the 2 lines below the ones you mentioned in the spreadsheet?
REM / 3063 / MAPPING_UNIVERSAL_6_PWM_LEVEL_1
REM / 3063 / MAPPING_UNIVERSAL_7_PWM_LEVEL_1
It says to change the werte values from 00 to 64 (100).
I have not tried that yet, so I don't know if it works or not.
It's not clear if the MAPPING_UNIVERSAL_6_OUTPUT and MAPPING_UNIVERSAL_7_OUTPUT also need to be coded or not.
If you do go and experiment, please let us know if it works or not!
I'd assume that the power level for the tail lights is already at 100% (64x), but it's hard to tell as there are so many light settings in REM.
|
Good point. I will give this a try and confirm for everyone. I am guessing, that the output is there in the inner rear lights, but it is just at 0% duty cycle in PWM.