Quote:
Originally Posted by shawnsheridan
I only know how to get it working in a U.S. spec'd car if it has a dedicated Combox.
|
You can read what I did to get Internet / BMW Live working in my F10 here:
Quote:
Can someone make a tutorial, how to enable internet over bluetooth to work in bmw f10 ?
I have Bmw f10 2012 with:
S612A BMW ASSIST
S614A Internet preparation
S616A BMW ONLINE
S6AAA BMW TELESERVICES
S6VCA COMBOX
Quote:
Change your VO as follows:
- 612 (or 633 or 639 if present)
+ 644
+ 614 (Required but already present)
+ 615
+ 6AL
+ 6AB
VO CODE HU_CIC
VO CODE CMB_MEDIA
FDL CODE CMB_MEDIA:
- TELEMATIK_VIN = Coding_VIN
FDL CODE CMB_MEDIA:
Use modified VO with VIN that has factory options 614 and 615 as explained in my earlier Post # 45:
http://www.bimmerfest.com/forums/sho...5&postcount=45
*** Use only to FDL Code CMB_MEDIA; DO NOT write this FA to the Car
1) Enable Data Transfer Option Under Phone
2) Enable Bluetooth Data Tethering on Phone
3) Under Connected drive; Update services (should show BMW Live and Internet services)
4) Go to BMW Live and Internet and make sure it it working
After it is working:
Use original VO with car VIN:
FDL CODE CMB_MEDIA:
- TELEMATIK_VIN = MOST_VIN
Read CMB_MEDIA and verify Short VIN in brackets [xxxxxxx] is car VIN.
DO NOT update services again or you will loose BMW Live and Internet.
*** If you do not return the Combox VIN to car VIN, you will encounter problems with future dealer programming, as the Combox will not be recognized, and programming will hault.
|
|
Hi Shawn! I was hoping your expertise might know the answer to this, I've been doing quite a bit of reading and research on whether or not I could enable BT audio streaming in my mid-year production 2012 F30.
I have the tech and nav packages with bluetooth phone calls but audio streaming is not enabled/present. However, and correct me if I am wrong, apparently, mid-2012 come with the correct combox (with BT audio streaming capabilities and internet/bmw live), and with my CIC module, all that is required would be coding to correctly recognize the combox? Is this a complicated coding process, or have you had experience in this?
http://www.bmwvin.com/?vin=F433839
Many thanks!