Quote:
Originally Posted by bmwdiy
Just can't get the bow into the slots. I even tried loosening the 10 mm bolds to push the actuator out a little, but since the grooves on the valve and the actuator are not parallel, I couldn't align them.
Are the grooves supposed to be parallel? Does the actuator actually rotate?
P.S: Newbie here (learned and used a torque wrench for the first time today  ) |
I ended up having to remove the actuator and taking a pair of locking pliers to forcefully move the notch. Not sure if I risked damaging the actuator but everything seems to be working now. I was prepared to purchase a new actuator but decided to try this first.