View Single Post
      03-27-2013, 10:22 PM   #9
Spikey
Captain
Australia
63
Rep
960
Posts

Drives: erratically
Join Date: Sep 2009
Location: around town~

iTrader: (0)

Quote:
Originally Posted by David328M-Sport View Post
Compare yours to mine:
As our photos are oriented, the old solenoid would be situated to the LEFT of the oil filler tube/cap.
Note how both of ours just has the bolt holes.
Look at the BLUE circle - just a little higher.
Quote:
Originally Posted by OCcaraholic View Post
You are looking in the wrong spot. It's not your blue or red circle, but just below the red circle, the last item at the bottom with the 5-Pin electrical connector. That is your electronic waste gate. You can see the rod on it going to the turbo on the exhaust. Both N20 and N26 have this now. N26 has always had it and N20 started in 7/2012 production.
Another way is to look at the engine number stamped on the front of the block, it will say N26 or N20 then the engine serial number.
Thanks guys.

David, I was looking at that area and yea.. it's just the bolt holes. green circle (attached)

OCcaraholic, Thanks for the feedback too. You're talking about the one circled in orange right? (attached)
Attached Images
  
Appreciate 0