View Single Post
      12-30-2012, 09:00 AM   #1576
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by ewill858 View Post
Update: Rebooted PC, disabled as many background apps as possible, and waited after connecting ENET cable until it was done "thinking" about the connection, and communications are up again.
I'm still seeing the Adaptive headlight / Active Blind Spot Detection Malfunctions upon coding the FEM_BODY modules.

The thing that is concerning me at this stage is that even when I reset the module (by applying "code" to the ECU), I still see one or both malfunctions upon completion of the code.

Additional information: I'm coding an F30/335i M-sport with ZDA

One more question: if I want to try restoring all my changes, is there a convenient way to do this efficiently? Or do I have to apply "code" to each ECU that has changed?

Thanks!
You can VO Code the entire SVT in one shot. See my post here:

http://www.f30post.com/forums/showpo...postcount=1498

If you have residual errors on you car, you can use Tool32 to try and clear them. See my post here:

http://www.f30post.com/forums/showpo...postcount=1262
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0