F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > Suspension | Chassis | Brakes > F30 3 Series M Performance Brakes Installed
RW Carbon
Post Reply
 
Thread Tools Search this Thread
      05-15-2012, 09:25 PM   #23
RPM90
Major General
 
Drives: 335i Msport w/sport AT
Join Date: Mar 2006
Location: Chicago

Posts: 6,032
iTrader: (1)

Quote:
Originally Posted by E90Fleet View Post
Bed them in first
YES, yes, yes! Properly bed them.

OP: You can find bedding guides all over the interwebs.
Specifically, look for Brembo's guide, it's easy to find.
RPM90 is offline  
0
Reply With Quote
      05-16-2012, 04:58 PM   #24
C ///M
First Lieutenant
 
C ///M's Avatar
 
Drives: '07 X3 M-Sport
Join Date: May 2010
Location: Chicago

Posts: 389
iTrader: (2)

Garage List
Please, someone tell me why they had to have the "M" portion of the ///M logo above the tri-color on all the calipers?? It looks soo tacky when 2 of the 4 calipers have the ///M logo seemingly facing the wrong direction. I said this in another thread thinking it was a pre-production thing, but I cannot believe its on the final products...why?
__________________
Prototype 2007 Monaco E83 'X3M' | N54T Swap | Gruppe M CF CAI | FMIC, DPs, CP, & Dual Oil Coolers TBD | Dual 2.5" Piping w/X-Pipe | M3 Rear Exhaust | 20" BC Forged HB05S | Michelin PSS 275 & 305 | F10 M5 & F30 M Brakes | KW Variant 2 | H&R Sways | BMW Performance Grills w/Tri-Color | Custom M Body Treatment | CF Trim | M Performance Carbon Shift & Handbrake Knobs | BMW Performance SS Pedals | M3 Dead Pedal | V1 Hardwired | Int LEDs | Umnitza Orion v4 AE & More
C ///M is offline  
0
Reply With Quote
      05-16-2012, 07:41 PM   #25
Elk
Major
 
Drives: 2012 335i
Join Date: Apr 2012
Location: *

Posts: 1,275
iTrader: (0)

Quote:
Originally Posted by RPM90 View Post
They vent gas build up during hard use allowing the pad to better maintain contact with the rotor.
True many years ago, but not with more contemporary pads, even race pads. This is like worrying about bias tires flat-spotting with storage.

It is funny how as enthusiasts we wantto buy the latest and best, but the adages as to design, care, benefits, etc. remain old technology (not picking on you, we all tend to do this. Change is hard. )

The shaving effect with race ready pads and hard use is legitimate, but not with street pads and street driving. This is a downside on the street as it increases wear a bit more than otherwise. No biggie. Chamfering the leading edge of the pads actually helps slow the wear.

BTW, he stated "Multiple heavy braking from triple digit speeds over 45 minutes." The pads are bedded in. Not the best way, but it is done.
Elk is offline  
0
Reply With Quote
      05-16-2012, 08:41 PM   #26
grimlock
Lieutenant Colonel
 
Drives: F10 N52B30@255PS
Join Date: Sep 2010
Location: Hong Kong

Posts: 1,758
iTrader: (0)

OMG
This might work for my f10, the gold color is what I want, but somehow it doesn't look quite right. It looks like a toy, like too small, and the covering is too plastic.. it might look like a weiner on the f10.
The M5 brakes need a harness, and only fit the front, if this is a direct bolt on..
Like the 'fake' holes and lines.. if this Brembo unit is an improvement over the stock f10 brakes it might be worth a try at this price.
grimlock is offline  
0
Reply With Quote
      05-16-2012, 08:44 PM   #27
RPM90
Major General
 
Drives: 335i Msport w/sport AT
Join Date: Mar 2006
Location: Chicago

Posts: 6,032
iTrader: (1)

Quote:
Originally Posted by Elk View Post
True many years ago, but not with more contemporary pads, even race pads. This is like worrying about bias tires flat-spotting with storage.

It is funny how as enthusiasts we wantto buy the latest and best, but the adages as to design, care, benefits, etc. remain old technology (not picking on you, we all tend to do this. Change is hard. )

The shaving effect with race ready pads and hard use is legitimate, but not with street pads and street driving. This is a downside on the street as it increases wear a bit more than otherwise. No biggie. Chamfering the leading edge of the pads actually helps slow the wear.

BTW, he stated "Multiple heavy braking from triple digit speeds over 45 minutes." The pads are bedded in. Not the best way, but it is done.
I don't feel picked on in the least, no sweat.

You said NO benefit, and I offered that there is.

We said, "properly" break them in.

BTW, I don't get your 2nd paragraph.
What is the point there?
RPM90 is offline  
0
Reply With Quote
      05-17-2012, 09:48 AM   #28
SupremePower3335
First Lieutenant
 
Drives: 2011 E90 LCI MSport
Join Date: Jun 2010
Location: T Dot!

Posts: 334
iTrader: (0)

WOW!!!

Do these work on the E90??
__________________
SupremePower3335 is offline   Canada
0
Reply With Quote
      05-17-2012, 10:04 AM   #29
Jason
Administrator
 
Jason's Avatar
 
Drives: E90 M3
Join Date: Mar 2005
Location: USA

Posts: 16,387
iTrader: (0)

Quote:
Originally Posted by SupremePower3335 View Post
Do these work on the E90??
Per the first post:

"The BMW M Performance sports brake system is only approved in combination with at least 18" aluminum wheels and unfortunately do not fit the E9X generation cars (including M3)."
__________________
Check on the Latest BMW News
Become a fan of Bimmerpost Facebook
Follow us on Bimmerpost Twitter
Subscribe to Bimmerpost Youtube Channel

Jason is offline   United_States
0
Reply With Quote
      05-17-2012, 10:40 AM   #30
sbce90
Me Boosta
 
sbce90's Avatar
 
Drives: 320i / MB C63 / VW up!
Join Date: Jan 2010
Location: Sydney, Australia

Posts: 5,456
iTrader: (3)

They look good, should come like this stock!

But I think the previous BMW Performance brake kit was better looking with its 6 piston fronts.
sbce90 is offline   Australia
0
Reply With Quote
      05-17-2012, 10:49 AM   #31
benzy89
Banned
 
Drives: '08 E90 335i
Join Date: Jan 2012
Location: Northern NJ

Posts: 2,396
iTrader: (3)

Garage List
2008 BMW 335i  [3.75]
Quote:
Originally Posted by SupremePower3335 View Post
Do these work on the E90??
only available on the F lineup... just got get a Brembo or STOPtech bbk, will do the same thing (if not better) for less money. And if you're really that picky, you can always get the calipers painted
benzy89 is offline   United_States
0
Reply With Quote
      05-17-2012, 11:18 AM   #32
BMW6Speed
BMW3
 
BMW6Speed's Avatar
 
Drives: 2011 335i xDrive Msport
Join Date: Nov 2010
Location: New Jersey

Posts: 68
iTrader: (0)

Whattt, damn that's kind of upsetting color wise for the yellow. That's more of a gold or really dark bronze type yellow. It is pretty ugly if you ask me. I thought they meant like bright lamborghini type yellow, which would look so sick on a black car with black rims. Guess I'll be getting the red or orange when the next gen m3 comes out
__________________

2011 335xi Msport
Jb3, BMW Performance Exhaust, BMS Performance Intake, BMS Chargepipe, AR 4" DP
Black Kidneys, 35% Tint, 20% Tail light Tint, Blacked out front reflectors, Painted Black Msport Rims
BMW6Speed is offline   United_States
0
Reply With Quote
      05-17-2012, 11:24 AM   #33
scott@bmwhn
Major
 
Drives: Msport 328i
Join Date: Mar 2008
Location: Houston

Posts: 1,175
iTrader: (3)

Is it wrong that I've already ordered these even though I wont have the car for another 4 months?
__________________
13' Msport 328i _Mperformance - Modulare - H&R_

Previous: 09' Msport 335i, 07' Msport 335i
scott@bmwhn is offline  
0
Reply With Quote
      05-17-2012, 11:27 AM   #34
SergioF30
Banned
 
Drives: 335i
Join Date: Apr 2012
Location: NJ

Posts: 64
iTrader: (0)

just a curiosity, what type of material is the brake rotor are made of?
Stainless steel? Iron Steel?
SergioF30 is offline  
0
Reply With Quote
      05-17-2012, 11:29 AM   #35
AlpWhite11
Captain
 
Drives: 335i
Join Date: Apr 2009
Location: Irvine

Posts: 695
iTrader: (0)

Send a message via Yahoo to AlpWhite11
Quote:
Originally Posted by SergioF30
just a curiosity, what type of material is the brake rotor are made of?
Stainless steel? Iron Steel?
The article says aluminum? :
AlpWhite11 is offline   United_States
0
Reply With Quote
      05-17-2012, 11:38 AM   #36
BreakPoint
Banned
 
Drives: E92 M3
Join Date: Jan 2011
Location: North NJ

Posts: 577
iTrader: (4)

Quote:
Originally Posted by 09BlkSapphire
Quote:
Originally Posted by SergioF30
just a curiosity, what type of material is the brake rotor are made of?
Stainless steel? Iron Steel?
The article says aluminum? :
The article actually DOESNT say. It says the calipers are aluminum.

Rotors are generally made from a material called "grey iron", (iron). The more expensive latter would be carbon ceramic, as seen as optional for the newer F- series M cars.
BreakPoint is offline   United_States
0
Reply With Quote
      05-17-2012, 11:41 AM   #37
AlpWhite11
Captain
 
Drives: 335i
Join Date: Apr 2009
Location: Irvine

Posts: 695
iTrader: (0)

Send a message via Yahoo to AlpWhite11
Quote:
Originally Posted by BreakPoint
Quote:
Originally Posted by 09BlkSapphire
Quote:
Originally Posted by SergioF30
just a curiosity, what type of material is the brake rotor are made of?
Stainless steel? Iron Steel?
Uhm the article says aluminum? :
The article actually DOESNT say. It says the calipers are aluminum.

Rotors are generally made from a material called "grey iron", (iron). The more expensive latter would be carbon ceramic, as seen as optional for the newer F- series M cars.
Sorry. I didn't read 'rotor' in his post.
AlpWhite11 is offline   United_States
0
Reply With Quote
      05-17-2012, 11:48 AM   #38
speedfan
Major
 
speedfan's Avatar
 
Drives: BMW
Join Date: Dec 2010
Location: HCM City

Posts: 1,105
iTrader: (2)

Quote:
Originally Posted by SupremePower3335 View Post
Do these work on the E90??
e9x Performance front brakes have 6 pots man! why would you want 4 pots over 6 pots?

the e9x Performance brakes are cheaper too.
__________________
My e90

Frozen Grey. Dry CF Roof. Vorsteiner Double Sided CF Boot Lid. OSS. BMW Performance Aero Kit. BMW Performance CF Diffuser Cover. BMW Performance CF Trim. Robson Design Steering Wheel. Advan RS. Michelin PSS. H&R Touring Cup Kit. BMW Performance Brakes. Eisenmann Race Rear Muffler. ESS Directflash
speedfan is offline   Vietnam
0
Reply With Quote
      05-17-2012, 12:19 PM   #39
Lamboblue
Bad Motherfucker
 
Drives: 2009 E92 AW
Join Date: Jul 2011
Location: Calgary

Posts: 71
iTrader: (0)

Garage List
Is it me, or are the front rotors shown in the pics installed in two different directions? On the left side the slots go from inside to outside and on the right side they go from outside to inside (or the other way around).
Lamboblue is online now  
0
Reply With Quote
      05-17-2012, 12:36 PM   #40
swifty
Major
 
Drives: FO M3
Join Date: Aug 2008
Location: canada

Posts: 1,203
iTrader: (5)

Quote:
Originally Posted by speedfan View Post
e9x Performance front brakes have 6 pots man! why would you want 4 pots over 6 pots?

the e9x Performance brakes are cheaper too.
The e9x Perf brakes won't fit 335s...only 328s.
swifty is offline  
0
Reply With Quote
      05-17-2012, 12:40 PM   #41
SupremePower3335
First Lieutenant
 
Drives: 2011 E90 LCI MSport
Join Date: Jun 2010
Location: T Dot!

Posts: 334
iTrader: (0)

Quote:
Originally Posted by Jason View Post
Per the first post:

"The BMW M Performance sports brake system is only approved in combination with at least 18" aluminum wheels and unfortunately do not fit the E9X generation cars (including M3)."
Thx..
__________________
SupremePower3335 is offline   Canada
0
Reply With Quote
      05-17-2012, 01:32 PM   #42
03BeastCharmer
Major
 
03BeastCharmer's Avatar
 
Drives: 03 M5, '13 & 97 M3
Join Date: Oct 2007
Location: Houston

Posts: 1,405
iTrader: (2)

Quote:
Originally Posted by scott@bmwhn View Post
Is it wrong that I've already ordered these even though I wont have the car for another 4 months?
Can't wait to see what you do with the new car.

Also, those yellow brakes do look more gold, like the carbon brakes on the M6.
__________________

Current: '13 E92 M3 Euro Delivery
Wife's: E39 M5, E36 M3
Gone: E86 M Coupe; E30 M3
03BeastCharmer is offline  
0
Reply With Quote
      05-17-2012, 01:35 PM   #43
Diver
Colonel
 
Diver's Avatar
 
Drives: Black '12 135i DCT PPK Msport
Join Date: Nov 2010
Location: Texas

Posts: 2,352
iTrader: (0)

This is a tough sell as an aftermarket item, but would look interesting as factory installed, at a much lower price.
__________________
Diver is offline   United_States
0
Reply With Quote
      05-17-2012, 02:37 PM   #44
BiscottiGelato
Captain
 
BiscottiGelato's Avatar
 
Drives: 09 135i M Sport 6MT
Join Date: Nov 2006
Location: GVA

Posts: 633
iTrader: (2)

As long as this doesn't have the crumbling piston problem, this is good, especially when it offers rotor diameter increase to a size beyond what the current M3 got. And I thought $2k is pretty good value also? Yes the rotor is not the best (not 2 piece floating, not convergent vane design), but I'm sure one can buy better rotors after this initial set is worn out.

I can only dream of 370mm x 30mm rotos on the 135i without breaking the bank...
__________________
Ground Control Camber Plates, Ferrodo D2500 w/ Slotted Rotors, Dunlop Direzza ZII on Apex EC-7s
BiscottiGelato is offline   Canada
0
Reply With Quote
Post Reply

Bookmarks

Tags
3 series bmw m performance parts, 3 series f30, 3 series f30 forum, 3 series forum, 3 series m performance, 3 series m performance parts, bmw 3 series forum, bmw 3-series f30, bmw f30, bmw f30 3-series, bmw f30 forum, bmw m performance brakes, f30 3-series, f30 3-series forum, f30 bmw m performance, f30 bmw m performance parts, f30 forum, f30 forums, f30 m performance, f30 m performance brakes, f30 m performance parts, m performance 3 series, m performance brakes, m performance brakes f30, m performance f30, m performance parts 3 series

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:21 PM.




f30post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST