08-11-2012, 01:53 PM | #1 |
Second Lieutenant
93
Rep 286
Posts |
F30 335 sport front bumper WHISKERS removal / install DIY
Hey Guys,
Heres a quick guide to replacing the bumper whiskers/blades on the F30 335 sport (non-M package). Estimated Time: 5-10 minutes Tools Necessary Optional: a flat head screwdriver/plastic molding remover Steps: 1. Take a look at the new whiskers and locate the clips. there are two on the passenger side and three on the drivers. Passenger Side: Drivers Side: Pass Side Demonstration: 2. Slowly apply pressure to the whisker to pull down and pop the clip against the fog light. (you can use the screwdriver/plastic remover to help pop the tab off) 3. Now reach into the bumper behind the where the whisker attaches to the bumper, it's hollow. 4. Referring back to the whisker not yet installed, notice how the clip is configured. It is easy to reach with your finger and press down on the clip and then slowly work the whisker out of place. *Note that you may need to apply a fair amount of pressure to work the whisker out of place, just have patience on this cause you don't want to snap the clip or the larger insert.* 5. now line up the new whisker and press. simple as that. Other F30 DIYs: Grills : http://www.f30post.com/forums/showthread.php?t=701830 Reflectors: http://www.f30post.com/forums/showthread.php?t=730082 Springs: coming soon Down pipe: coming soon Hope this Helps to answer any questions!
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
08-13-2012, 05:43 AM | #2 |
Major
237
Rep 1,478
Posts
Drives: '11 M3 MW/FR - '12 M3 FO/SC
Join Date: Dec 2008
Location: California
iTrader: (6)
Garage List 2004 Honda Hornet [0.00]
2003 Chevrolet 2500 ... [0.00] 2011 BMW S1000RR [0.00] 2011 BMW E92 M3 [0.00] 2012 BMW E92 M3 [0.00] |
Looks pretty good with just the whisker removed as well...does it look like its missing when it's not there?
__________________
|
Appreciate
0
|
08-13-2012, 11:39 AM | #3 |
Second Lieutenant
93
Rep 286
Posts |
yes and no, its black so it doesn't stand out that much but it looks like your missing something in the front end.
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
Appreciate
0
|
08-24-2012, 04:42 PM | #4 |
Private
18
Rep 75
Posts |
i second that 1.fresh... me personally i have the base model and upgrading to the sportline foglight grills only(35 a pop). still debating on the whiskers tho..i guess ill see how it looks once theyre on there and how bad my ocd kicks in and take it from there.
imo, its personal preference.
__________________
the only thing in this world that gives orders is balls. You got that? Balls. Last edited by steadymoddn504; 08-24-2012 at 06:45 PM.. |
Appreciate
0
|
08-28-2012, 12:19 PM | #6 |
Second Lieutenant
93
Rep 286
Posts |
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
Appreciate
0
|
08-29-2012, 02:24 PM | #7 | |
Private
18
Rep 75
Posts |
update
Quote:
had that one coming bc of different bumpers but it didnt hurt to try plus the parts guy wasnt sure either so i went with it. dnt judge me with that being said, my plans for a gloss black theme (m performance grills+black chrome tips+gloss black fog grills w/black whiskers) are a no go.. i was trying to go for the perfect gloss black trifecta looks wise...tellem franco
__________________
the only thing in this world that gives orders is balls. You got that? Balls. Last edited by steadymoddn504; 08-29-2012 at 02:32 PM.. |
|
Appreciate
0
|
09-08-2012, 01:49 AM | #8 |
Bad Motherfucker
3
Rep 77
Posts
Drives: 2009 E92 AW
Join Date: Jul 2011
Location: Calgary
|
Just plastidiped f30 whiskers red on an alpine white... It looks amazing!! Perfectly matches red sport line interior trim.. Will post pics this weekend from conputer
|
Appreciate
0
|
09-13-2012, 07:21 PM | #10 |
Second Lieutenant
93
Rep 286
Posts |
"Yes, Yes, Yes! Find One, Yes"-(name that quote)
I agree
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
Appreciate
0
|
09-17-2012, 11:52 PM | #11 |
Captain
81
Rep 664
Posts
Drives: 2013 BMW 335i
Join Date: Sep 2012
Location: Bay Area, CA
|
Hey i was wondering why is there a hole on the passenger side right next to the fog light, but on the drive side its covered next to the fog light. i seen it on a lot of pictures of people with the sport line. but on bmw website it doesnt show that hole (missing piece look)
|
Appreciate
0
|
09-20-2012, 07:41 PM | #12 |
New Member
6
Rep 23
Posts |
Does anyone know what the section the whisker is in is called? The whole black section? I have a 320 and that lower grill (?) has no spot for whiskers, and I need to change the whole piece. Its currently all black plastic.
|
Appreciate
0
|
09-25-2012, 08:30 AM | #13 |
Second Lieutenant
93
Rep 286
Posts |
Nybimmer, if you don't have a sport the grill will not fit. I don't have the exacts as to why but I know it won't... Search it but I'm like 99% sure
Antbabee, I think it has to do with the stock intercooler(s) but don't quote me, that's based off working with Audis and vws
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
Appreciate
0
|
12-04-2012, 02:26 PM | #14 | |
Lieutenant
164
Rep 573
Posts
Drives: 2013 F30 335i 8SA M-Adaptive
Join Date: Oct 2012
Location: Dallas, Tx (Frisco)
|
Quote:
Opinions? |
|
Appreciate
0
|
01-09-2013, 01:24 PM | #15 | |
Second Lieutenant
93
Rep 286
Posts |
Quote:
__________________
'12 335i Sport Apline White w/black... Totaled
'14 535i xdrive M-Sport Carbon Black w/Mocha Nappa |
|
Appreciate
0
|
02-08-2013, 01:18 AM | #16 |
New Member
0
Rep 5
Posts |
Actually, I think removing the fog lamps and keeping the whiskers as it is will make it look less like something is missing. Just saw this picture in google images and I liked it.
Ever since I have seen the m-sport with front bumper lip and splitters, I am regretting my decision of getting a sport instead of m-sport |
Appreciate
0
|
04-09-2014, 07:56 PM | #17 |
Enlisted Member
11
Rep 41
Posts |
I replaced my silver whiskers today with black whiskers from IND. Went well --- thanks for the directions.
Only thing I'd add is that the black tabs on the "car side", not the whisker, do NOT move. The tabs are clearly not designed to move. So I had to gently pry the whisker "holes" to get them free. Once the small end was free, the bigger end popped out suddenly on both sides. Nothing broken, but it scared me. If something broke, it probably would be on the whisker side. Probably. Photos showing before & after. 2014 335i Sport, Mineral Grey. The black whiskers are 100%+ better. I was even able to move the clear bra that I had installed on the silver whiskers to the black whiskers. Check out how to install clear bra to get pointers. It involved a hair dryer for heat, a small container of water with 2 drops of detergent and a very gentle peeling back of the clear bra, trying not to stretch it. It worked fine. |
Appreciate
0
|
05-23-2014, 02:07 PM | #18 |
Second Lieutenant
41
Rep 243
Posts |
OH MY G! Thank you for this, and special thanks for picture 5. I was doing my install and freaked out like I hit some bird or pressure washed the piece of plastic off because it just did not look right, but it looks like you have the same weird one sided intake as I do.
Last edited by Jera_Jakerz; 05-23-2014 at 02:16 PM.. |
Appreciate
0
|
05-23-2014, 02:15 PM | #19 |
Second Lieutenant
41
Rep 243
Posts |
More specifically this.
What exactly is this for, and looking at the post above mine, his gap between the intake and nada is much smaller, mine looks like a tiny piece of plastic has ripped off - the white could also be from the rushed DYI car wash I did and not thoroughly rinsing all the soap.
__________________
JB4 Stage 2 | aFe Magnum FORCE Intake System DRY | ER Chargepipe | ER CATLESS Downpipe | ATM Intercooler | BMS 2.3 Gal Meth Inj kit | Bilstein B14 | OEM Slotted/Dimpeled front rotors | Cool Carbon brakes | Go Fast Bit DV+ | Pure Stage 2 Turbo | Pure inlet
|
Appreciate
0
|
06-02-2014, 11:26 AM | #20 |
Private First Class
24
Rep 179
Posts |
|
Appreciate
0
|
07-30-2014, 12:51 PM | #22 | |
Private First Class
10
Rep 102
Posts
Drives: 2013 328xi Sport Line
Join Date: Jun 2014
Location: Mississauga, ON
|
Quote:
Note, you'll need to gradually increase the pressure, I remember feeling like I was pushing too hard, but then they came off. If your replacing them altogether, then you should worry if they break. However, if you're painting them, then just increase the pressure from behind gradually. At least, that's what worked for me. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|