[BMWGRAM]

The following is my F30 335i Sport Line build...
The car is fully loaded, Jet black on black, with stock 19's. This thread is from start to current and I will update as I proceed with the modifications. Any wheel/exhaust/spring companies in the industry looking to represent and sponsor a great car, youve found the spot .

Current Mods:
- Black Grills
- 20% tint
- Custom LTBMW 1M style bumper w Slek CRT Carbon Fiber lip

Future:
- Full exhaust with Quad tips (preferably Meistechaft GT Haus GTC)
- Carbon fiber diffuser
- Lowering springs (Einbach/H&R/KW help me out!)
- Wheels (Adv.1, HRE, Morr, etc. Need help from you guys too!)
- Trunk spoiler

Here are the pictures with a few added extras of the car. The picture with the 1M bumper belongs to F30n55, its just to see what mine will look like this wednesday. Adv.1's are currently off.

Pictures:




























NEW BUMPER INSTALLED:
Just got my LTBMW 1M bumper from LTBMW in California. For those who do not know, its an f30 bumper molded with the bottom half of the 1m, so fitment is nearly there. I received it today by Pilot freight, and started installing. Overall pretty easy, the ducts were confusing, and fitment was not exact. It took me a while to figure out, but eventually it was on and tight. the only problem i see is that the bottom does not attach at all, leaving the bottom of the flexible thing in the wheel wells and under the car exposed, so i tucked it under. unfortunately when i was driving the wind pushed the wheel well flexible things into the wheel and shredded it up , so i will need a new one. i also need to figure out how to fit honey comb into the side vents rather then leaving them open because the ducts dont fit. although, it does look amazing. new grills will be installed tomorrow, as well as the new flexible things in the wheel covers with brackets to hold it. thanks to ltbmw! i love it

Pictures: more to come!

[bcl0328]

need more pics of the front bumper!

[BMWGRAM]

Originally Posted by bcl0328

need more pics of the front bumper!

when its installed wednesday! that front bumper is f30n55's

[nano10]

Nice mods!What was the specs and offset of the wheels that were too aggressive?

[BMWGRAM]

Originally Posted by nano10

Nice mods!What was the specs and offset of the wheels that were too aggressive?

They were 20x11 rear and 20x9.5 front. Offsets were low because they came off an e93 m3.

[nano10]

Originally Posted by F30ftw

They were 20x11 rear and 20x9.5 front. Offsets were low because they came off an e93 m3.

Wow, thanks for info. I am about to do 19x8.5et32 19x9.5et32 am a little nervous because i have been told its very aggressive.

[BMWGRAM]

Originally Posted by nano10

Wow, thanks for info. I am about to do 19x8.5et32 19x9.5et32 am a little nervous because i have been told its very aggressive.

That should work. I'm guessing the rears had around a et25 offset but they were 20x11 so it's a really wide wheel/tire. I'm sure yours would work. What wheels are they? Post pics when they are on!!

[Rossifumi]

Originally Posted by nano10

Wow, thanks for info. I am about to do 19x8.5et32 19x9.5et32 am a little nervous because i have been told its very aggressive.

The rears are a the same as all the guys with 10.5 ET45 (Stance 5 wheels). So no problem there. The fronts are almost a full cm less aggressive than my front wheels so no issue there either.

The rears are aggressive though, without a drop the wheels will be outside of the fender. I don't like that look (on stock suspension), when I looked in the rear view mirrors I could see the rim/tire outside of the fender.

But I will take care of that in the spring when I install the coilovers.

[F10N55]

Can't wait, car looks great.

[fad]

Hey bro, mind showing us pics of the 1M bumper from straight angle?

[Jackson743]

And with lighting where we can actually see it.

[Maz335i]

Originally Posted by Jackson743

And with lighting where we can actually see it.

+1

[nano10]

Originally Posted by Rossifumi

The rears are a the same as all the guys with 10.5 ET45 (Stance 5 wheels). So no problem there. The fronts are almost a full cm less aggressive than my front wheels so no issue there either.

The rears are aggressive though, without a drop the wheels will be outside of the fender. I don't like that look (on stock suspension), when I looked in the rear view mirrors I could see the rim/tire outside of the fender.

But I will take care of that in the spring when I install the coilovers.

Thanks, i will do drop but i will only do m performance or eibach springs as keep as close to stock ride comfort and it seems neither will be available for a while. I called eibach in oct and they are 6 months from 335i spring and you can find the m performance debacle in the suspension threads. It will be stock for a while for me

[nano10]

Originally Posted by F30ftw

That should work. I'm guessing the rears had around a et25 offset but they were 20x11 so it's a really wide wheel/tire. I'm sure yours would work. What wheels are they? Post pics when they are on!!

They are BBS, dont want to say what kind until they are on, pics for sure

[the infamous...]

*subscribed*

i'd contact hre or morr if i were u

[BMWGRAM]

Originally Posted by the infamous...

*subscribed*

i'd contact hre or morr if i were u

ive been talking to morr, i would like to talk to hre as well.

[BMWGRAM]

Originally Posted by Jackson743

And with lighting where we can actually see it.

yes, the bumper will be installed this week. the current picture is not mine it is f30n55's

[BMWGRAM]

Originally Posted by fad

Hey bro, mind showing us pics of the 1M bumper from straight angle?

yes i will once its installed, the picture up is f30n55's

[BMWGRAM]

check out new photos!!!

[the infamous...]

Originally Posted by F30ftw

ive been talking to morr, i would like to talk to hre as well.

sweet, hope ur talkin bout their new ms series , if not...

*ahem*
hre s104

[Cfichman]

super ugly. plain bad taste, nothing looks right there.

[itachi_d]

Awesome, I like!