[kon]

Originally Posted by shawnsheridan

Connect => Read FA => Activate FA => Read VCM => Right-Click on CMB_MEDIA (the ECU itself not the underlying CAFD) => Select CODE.

Do the same for CMB_ECALL if you have it, and HU_CIC.

Thanks. Gonna try this in the next hour before heading to work.

Does it matter if I also add in 6NR? I know it needs fsc code, just want to see the extent of it working/not working.

[shawnsheridan]

Originally Posted by kon

Thanks. Gonna try this in the next hour before heading to work.

Does it matter if I also add in 6NR? I know it needs fsc code, just want to see the extent of it working/not working.

No, don't do it. If you add 6NR, you are basically just FDL Coding HU_CIC / A4A_REMOTE_APPS = aktiv.

If 6NR is in the VO, or you FDL Code HU_CIC / A4A_REMOTE_APPS, with no valid 6NR FSC Code, it will override the HU_CIC / CONNECTED_DRIVE setting and ConnectedDrive on Main Menu will revert to BMW Assist.

[kon]

Originally Posted by shawnsheridan

I don't know on the F30, but for the F10, the initial Gong can be coded on or off in the same section of ACSM / 3000 via:

Initialwarnung_GWF_IW

In your case then, since you like the Gongs, you can enable the passenger one.

FYI only, F30 does have this same settings

[kon]

Originally Posted by shawnsheridan

No, don't do it. If you add 6NR, you are basically just FDL Coding HU_CIC / A4A_REMOTE_APPS = aktiv.

If 6NR is in the VO, or you FDL Code HU_CIC / A4A_REMOTE_APPS, with no valid 6NR FSC Code, it will override the HU_CIC / CONNECTED_DRIVE setting and ConnectedDrive on Main Menu will revert to BMW Assist.

Roger! Actually I did FDL code before, and like you said, though my menu was changed to ConnectedDrive, once I activated A4A, it revert to "BMW Services"

[shawnsheridan]

Originally Posted by kon

FYI only, F30 does have this same settings

Plus on the F10, we also have these two, which disables the Seatbelt Gongs on disconnect:

SPW_BF (aka SBR_PreWarning_Beifahrer)
SPW_FA (aka SBR_PreWarning_Fahrer)

So in total, there are 7 FDL Codes for Seatbelt disabling of some sort.

[shawnsheridan]

Originally Posted by kon

Roger! Actually I did FDL code before, and like you said, though my menu was changed to ConnectedDrive, once I activated A4A, it revert to "BMW Services"

Yes, it would revert to BMW Assist in the U.S., and BMW Services elsewhere.

FYI. You can buy a 6NR FSC Code and Import and Activate it, and get BMW Apps without having 6NF, except you just wont won't have Video and iPod out functions.

[kon]

Originally Posted by shawnsheridan

Yes, it would revert to BMW Assist in the U.S., and BMW Services elsewhere.

FYI. You can buy a 6NR FSC Code and Import and Activate it, and get BMW Apps without having 6NF, except you just wont won't have Video and iPod out functions.

What is the estimated price for such FSC code? If it's too costly I'll probably pass since I'm only doing it to see what it is capable off. Tried it while in Germany, I doubt i will ever use them

[kon]

Originally Posted by shawnsheridan

Plus on the F10, we also have these two, which disables the Seatbelt Gongs on disconnect:

SPW_BF (aka SBR_PreWarning_Beifahrer)
SPW_FA (aka SBR_PreWarning_Fahrer)

So in total, there are 7 FDL Codes for Seatbelt disabling of some sort.

These 2 is if one were to release the seatbelt while the car is moving then it'll start to chime?

[kon]

Shawn, what's your thought on the Sports Display? Are they fake (report base on accelerator press), or are they real?

A fren was asking if we can up the torque limit displayed, right now it is maxing out at 400NM, the M135i or the PPK would increase the torque further, so wondering how to enable the higher limit, and if done, is it worth anything

[shawnsheridan]

Originally Posted by kon

These 2 is if one were to release the seatbelt while the car is moving then it'll start to chime?

Yes, exactly.

[shawnsheridan]

Originally Posted by kon

What is the estimated price for such FSC code? If it's too costly I'll probably pass since I'm only doing it to see what it is capable off. Tried it while in Germany, I doubt i will ever use them

I paid $200 for mine, but if I wanted them to also Import and Activate the FSC Code in my CIC, it would have been another $50 ($250 total).

I did it just for the Pandora App, which is much better than just normal Pandora Phone App streamed via BT.

I could care less about Facebook, Twitter, and Video.

[shawnsheridan]

Originally Posted by kon

Shawn, what's your thought on the Sports Display? Are they fake (report base on accelerator press), or are they real?

A fren was asking if we can up the torque limit displayed, right now it is maxing out at 400NM, the M135i or the PPK would increase the torque further, so wondering how to enable the higher limit, and if done, is it worth anything

You know, I enabled mine, looked at them once, and that's been about it. I personally think they are "ballpark" numbers, and more of a gimmick than anything.

[shawnsheridan]

Originally Posted by kon

Thanks. Gonna try this in the next hour before heading to work.

Does it matter if I also add in 6NR? I know it needs fsc code, just want to see the extent of it working/not working.

Well, what happened? Office or still no Office?

[clarence]

Originally Posted by shawnsheridan

Thanks for the explanation.

So F10's with 606 went from CIC-MID to HU-Champ beginning 7/10?

I thought CIC-MID was the better of the two?

From the ETK it looks like it, & it seems if ur pre-07/10 car w/606 have a HU hardware failure the dealer can replace the CIC-MID HU with a CHAMP2 HU.
Actually, wht are the hardware differences between the 2 platforms?

[kon]

Originally Posted by shawnsheridan

Well, what happened? Office or still no Office?

Sorry for the long wait... our garage is not exactly near to where we work & live...

Just finished all the step, the good news is Office menu is finally available...

BUUUUUT, within the Office menu, there is nothing more than Contacts, no message or anything of that sort, but i did notice the bluetooth option in iPhone 4S (IOS6.0.1) now has a "Sync Notification" that I turned on - it wasn't there previously. I send a message to myself, but nothing happen

Will need to do more testing, or is there something else I miss.

I did VO code CMB_Media & HU_CIC. No error of any sort, all went thru like clockwork on first attempt!

I went to check YouTube video on Office presentation, seems that I should/need to enable "Office" (along with "Bluetooth audio") in the Telephone/Bluetooth device setup screen. I did went there to check, but I don't see an "Office" checkbox... I'm gonna try it with my Blackberry Bold later, which does support MAP earlier than iPhone.

[shawnsheridan]

Originally Posted by kon

Sorry for the long wait... our garage is not exactly near to where we work & live...

Just finished all the step, the good news is Office menu is finally available...

BUUUUUT, within the Office menu, there is nothing more than Contacts, no message or anything of that sort, but i did notice the bluetooth option in iPhone 4S (IOS6.0.1) now has a "Sync Notification" that I turned on - it wasn't there previously. I send a message to myself, but nothing happen

Will need to do more testing, or is there something else I miss.

I did VO code CMB_Media & HU_CIC. No error of any sort, all went thru like clockwork on first attempt!

I went to check YouTube video on Office presentation, seems that I should/need to enable "Office" (along with "Bluetooth audio") in the Telephone/Bluetooth device setup screen. I did went there to check, but I don't see an "Office" checkbox... I'm gonna try it with my Blackberry Bold later, which does support MAP earlier than iPhone.

I'm glad it is working now.

I think that is normal for iOS. Apple Users got BMW Apps, and Blackberry Users got Office. Now with the new iOS6 though, I think Apple Office functionality is there now.

But you need to make sure your Combox has the latest UPD01006 firmware (MX-3.5.4, TX-3.5.6) on it though:

http://www.bmw.com/com/en/owners/nav...update_vin.jsp

[kon]

Originally Posted by shawnsheridan

I'm glad it is working now.

I think that is normal for iOS. Apple Users got BMW Apps, and Blackberry Users got Office. Now with the new iOS6 though, I think Apple Office functionality is there now.

But you need to make sure your Combox has the latest UPD01006 firmware (MX-3.5.4, TX-3.5.6) on it though:

http://www.bmw.com/com/en/owners/nav...update_vin.jsp

Theoretically, it's not working yet , and I already loaded the latest bluetooth firmware last week, I doubt i need to reload it again, right?

[shawnsheridan]

Originally Posted by kon

Theoretically, it's not working yet , and I already loaded the latest bluetooth firmware last week, I doubt i need to reload it again, right?

No, not if you updated just last week.

Hookup a Blackberry with MAP, and I think you will find it works just fine. On your Blackberry under the MAP Options you will have to select which email accounts you want and if you want SMS to appear.

[ilhan1103]

Originally Posted by shawnsheridan

Good God BMW makes it damn difficult to understand them.

You are referring to the Head Unit name in E-Sys I assume, but I also assume that with 606 your maps are still HU-Champ Motion maps.

Yes, I meant the name in e-sys like you allready guessed.

No idea what you mean by 'Motion maps' ...

[shawnsheridan]

Originally Posted by ilhan1103

Yes, I meant the name in e-sys like you allready guessed.

No idea what you mean by 'Motion maps' ...

I was referring to your maps assuming you had 606 Business Nav.

[awhk]

Originally Posted by shawnsheridan

No, not if you updated just last week.

Hookup a Blackberry with MAP, and I think you will find it works just fine. On your Blackberry under the MAP Options you will have to select which email accounts you want and if you want SMS to appear.

Thank you Shawn for the info and Kon for the testing!

Now for me to do some coding later today.

Edit: Also thanks to Clarence as well!

[ilhan1103]

I do, but still no idea what motion maps are