F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.
ARMA SPEED
Post Reply
 
Thread Tools Search this Thread
      02-17-2013, 07:33 PM   #2707
kon
Lieutenant
Singapore
20
Rep
490
Posts

Drives: F30 310i > G20 310i
Join Date: May 2012
Location: Sillypore

iTrader: (0)

Quote:
Originally Posted by john08135i View Post
i did and i drove across time zone few times with no change..
I might sounded silly but do you have nav/gps?

have coded mine a few months now, it still somehow sync with my iphone time exact down to the second (the minute tick together)
Appreciate 0
      02-17-2013, 07:44 PM   #2708
john08135i
Major
john08135i's Avatar
United_States
77
Rep
1,027
Posts

Drives: 2013 M Sport, 2010 bmw S1000RR
Join Date: Oct 2008
Location: Orlando

iTrader: (0)

Yes of course. I set it and drove across few time zones no change at all.
__________________
M Sport Line Estoril Blue
Appreciate 0
      02-18-2013, 02:06 AM   #2709
lokito
Registered
lokito's Avatar
Puerto Rico
1
Rep
46
Posts

Drives: 335i ///M Sport
Join Date: Nov 2012
Location: Somewhere

iTrader: (0)

Quote:
Originally Posted by Frogman View Post
For the mirror folding and windows up/down via the fob, you also have to code FEM_BODY / 3053 PwMaster / KOMFORTSCHLISSUNG_FB to aktiv (Werte=00).

Note that Werte=00 is not a typo, it's a strange one in that usually aktiv has a Werte=01 and nicht_aktiv has a werte of 00). This one does not!

Just code the function value to aktiv and leave the Werte alone and you will be fine.


I can't help you on the FEM_BODY / 3050 / FH_TUERAUF_STOP_MAUT, that only needs that one value to be changed. Note that you need to set it to nicht_aktiv (default is aktiv). You should double check that it's actually coded to nicht_aktiv by re-reading the coding data from the car.
Awesome, thanks! That fixed the problem with the mirrors. About the windows roll up, the value is set to nicht_aktiv. Not sure why is not working, I might change it back to default and try again.
__________________
2013 335i ///M-Sport |6MT|Mineral Grey|DHP|PDC|HK|
Appreciate 0
      02-18-2013, 04:45 AM   #2710
raj10800
Private
5
Rep
67
Posts

Drives: G20 330i
Join Date: Jan 2013
Location: India

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
A2DP requires 6NK or 6NL. If you have only 6NH, I do not think you can code it.

BMW Apps will require you to purchase a 6NR FSC Code and Import and Activate it, and if you want the Video / PlugIn functionality too, you have to retrofit 6NF Ejector Box (Base Plate), or replace the 6FL USB/Aux-In port with the Mini USB/AV-In port and run FBAS video line from new connector to the CIC.
Shawn,

As mentiuoned earlier I have 6NH and Prof Navigation. Will I be able to code 6NH to 6NK (as sent tome by you earlier) or is it not possible as per your this quote.

Regards,
Rajesh
Appreciate 0
      02-18-2013, 09:17 AM   #2711
ykau
Private
7
Rep
84
Posts

Drives: F30 320I
Join Date: Nov 2012
Location: Singapore

iTrader: (0)

that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks
Appreciate 0
      02-18-2013, 09:29 AM   #2712
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by ykau View Post
that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks
Not sure, but you need to add CAFD back.

Connect => Read FA => Activate FA => Read VCM => Left-Click on INHK => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on INHK (the ECU itself not the underlying CAFD) => Select CODE.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-18-2013, 09:31 AM   #2713
ykau
Private
7
Rep
84
Posts

Drives: F30 320I
Join Date: Nov 2012
Location: Singapore

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Not sure, but you need to add CAFD back.

Connect => Read FA => Activate FA => Read VCM => Left-Click on INHK => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on INHK (the ECU itself not the underlying CAFD) => Select CODE.

thanks bro. it works!! You have saved me once again!!

Last edited by ykau; 02-18-2013 at 06:24 PM..
Appreciate 0
      02-18-2013, 06:26 PM   #2714
ykau
Private
7
Rep
84
Posts

Drives: F30 320I
Join Date: Nov 2012
Location: Singapore

iTrader: (0)

Hi shawn, I wondered if i'm being paranoid, the car engine sounded more noisy than before after the ilevel upgrading. It sounded more like a truck now. Anything to do with INHK? thanks
Appreciate 0
      02-18-2013, 06:46 PM   #2715
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by raj10800 View Post
Shawn,

As mentiuoned earlier I have 6NH and Prof Navigation. Will I be able to code 6NH to 6NK (as sent tome by you earlier) or is it not possible as per your this quote.

Regards,
Rajesh
With Nav Pro, you should have a Combox, so you should be able to go from 6NH to 6NK.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-18-2013, 06:48 PM   #2716
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by ykau View Post
Hi shawn, I wondered if i'm being paranoid, the car engine sounded more noisy than before after the ilevel upgrading. It sounded more like a truck now. Anything to do with INHK? thanks
I don't see how. This ECU is for the Integrated automatic heating/air conditioning system.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-18-2013, 07:01 PM   #2717
ykau
Private
7
Rep
84
Posts

Drives: F30 320I
Join Date: Nov 2012
Location: Singapore

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
I don't see how. This ECU is for the Integrated automatic heating/air conditioning system.
thanks bro. I think could be the normal characteristic of the car .
Appreciate 0
      02-18-2013, 07:35 PM   #2718
kon
Lieutenant
Singapore
20
Rep
490
Posts

Drives: F30 310i > G20 310i
Join Date: May 2012
Location: Sillypore

iTrader: (0)

Quote:
Originally Posted by ykau View Post
that is strange. I have my Ilevel upgraded to 505 today and all settings are reverted back. the strange thing was I as usual set the INHK -> memory_off -> the air con setting and suddenly the air con heater button went blinking. Try to set it back but the INHK-CAFD-SVT are gone or rather its no longer green anymore.
what worst is blowing warm air instead of air con. What happened to it guys. I'm using 3.18 and 48.1. thanks
The dreaded 505. You should be using esys3.22 and 48.3 already. But it's interesting that you could still code, all we get was error when trying to code. And since you've moved up to 505, safe to assume dealer upgraded your car I-level successfully then.

Last edited by kon; 02-18-2013 at 08:36 PM..
Appreciate 0
      02-18-2013, 07:57 PM   #2719
ykau
Private
7
Rep
84
Posts

Drives: F30 320I
Join Date: Nov 2012
Location: Singapore

iTrader: (0)

Quote:
Originally Posted by kon View Post
The dreaded 505. You should be using esys3.22 and 48.3 already. Button it's interesting you could still code, all we for was error. And since you've moved up to 505, safe to assume dealer upgraded your car I-level successfully then.

hi kon, yes. I can still code INHK, FEM_BODY and KOMBI but except for HU_CIC. Upgrading was first failed until I have reverted back the VO settings including the office or the bmw apps.

Now the problem is it seem the engine is louder than before. sigh... can i pay you a visit?


You guys may want to take note before the upgrading process. thanks.
Appreciate 0
      02-18-2013, 08:36 PM   #2720
kon
Lieutenant
Singapore
20
Rep
490
Posts

Drives: F30 310i > G20 310i
Join Date: May 2012
Location: Sillypore

iTrader: (0)

Quote:
Originally Posted by ykau View Post
Now the problem is it seem the engine is louder than before. sigh... can i pay you a visit?
For? I can't fix loud engine noise
Appreciate 0
      02-19-2013, 08:37 AM   #2721
raj10800
Private
5
Rep
67
Posts

Drives: G20 330i
Join Date: Jan 2013
Location: India

iTrader: (0)

Quote:
Originally Posted by Aritaurus View Post
I was actually on 6NH and changed it to 6NK. I just FDL coded a few things on HU_CIC and got connected drive to come up.

I think this is the part where I need to use a ghost vin like you said earlier. For me, I have nothing to lose since I don't have BMW assist. It just shows up on my menu with some phone numbers to call for service.
Hi Aritaurus - what do I need to code to get Connected drive enabled. I have a F30 with 6NH and Prof Nav.
Appreciate 0
      02-19-2013, 08:45 AM   #2722
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by kon View Post
For? I can't fix loud engine noise
Some people will want to know what was done to enable "truck engine" option...so they can do it too.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-19-2013, 01:35 PM   #2723
dcg71
Captain
Australia
72
Rep
941
Posts

Drives: F15 X5
Join Date: Jul 2009
Location: Brisbane, Australia

iTrader: (2)

DIES_IST_TRUCK -> activ

__________________
2015 F15 X5 25d Space Gray | Pure Excellence | Dakota Leather/Brushed Aluminium | Anthracite Head Liner | Fender Flares | Connected Drive + Real Time Traffic
2012 F30 335i Sapphire Black
2006 E92 325i Titan Silver
2000 E46 318i Cosmos Black
Appreciate 0
      02-19-2013, 03:03 PM   #2724
eclipsisNA
Colonel
United_States
348
Rep
2,937
Posts

Drives: 2013 Estoril 328i M Sport
Join Date: Oct 2007
Location: Beverly Hills, CA

iTrader: (6)

Garage List
2014 BMW 428i  [7.76]
Can anyone confirm that a USB OBD2 cable would work instead of an ENET? I was looking at this:

http://www.ebay.com/itm/DIAGNOSTIC-C...item43b194141a
Appreciate 0
      02-19-2013, 03:36 PM   #2725
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by eclipsisNA View Post
Can anyone confirm that a USB OBD2 cable would work instead of an ENET? I was looking at this:

http://www.ebay.com/itm/DIAGNOSTIC-C...item43b194141a
Work for what? E-Sys? No. It must be an ENET Cable. That cable is a VAG-COM Cable for VW & Audi.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-19-2013, 03:39 PM   #2726
martinf79
Captain
martinf79's Avatar
189
Rep
802
Posts

Drives: 2020 G05 X5 M50i
Join Date: May 2012
Location: Toronto, Canada

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Some people will want to know what was done to enable "truck engine" option...so they can do it too.
I'd like to know what option this is....
__________________
2020 X5 M50i | 2015 X3 28i xLine | Retired 2013 335i M Sport
Appreciate 0
      02-19-2013, 08:28 PM   #2727
martianpc
Private
9
Rep
70
Posts

Drives: 2013 335i
Join Date: May 2012
Location: Central, PA

iTrader: (0)

These torrents are really looking good. Any idea how many seeders we have? I may have to back off, my network has been giving me trouble. I have uploaded 244GB so far over the 4 files since started seeding though! I think we have a lot of people who want to code.
__________________
2013 MG 335i
Appreciate 0
      02-19-2013, 08:30 PM   #2728
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,133
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by martianpc View Post
These torrents are really looking good. Any idea how many seeders we have? I may have to back off, my network has been giving me trouble. I have uploaded 244GB so far over the 4 files since started seeding though! I think we have a lot of people who want to code.
My server is still serving up around 500 Gb per day.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
Post Reply

Bookmarks

Tags
3 series coding, 3 series f30, 3 series f30 coding, 3 series f30 forum, 3 series forum, 3-series forum, 5 series f10 coding, ass, ass disable, auto start stop, auto start stop disable, bmw 3 series coding, bmw 3 series f30, bmw 3 series forum, bmw 3-series f30, bmw 3-series forum, bmw 5 series coding, bmw auto start stop disable, bmw auto start stop disabling, bmw coding, bmw coding directions, bmw coding diy, bmw coding instructions, bmw diy, bmw diy forum, bmw f10 coding, bmw f30, bmw f30 3 series, bmw f30 3-series, bmw f30 coding, bmw f30 forum, coding 3 series, coding f30, coding f30 3 series, disable ass, disable auto start stop, disable bmw auto start stop, disabling auto start stop, disabling bmw auto start stop, f10 5 series coding, f10 coding, f30 3 series, f30 3 series coding, f30 3 series forum, f30 3-series, f30 3-series forum, f30 coding, f30 forum, f30 forums

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:34 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST