[marenco35]

Hello all. think i made a big mistake....Trying to instal bmw Apps and playing with different VIN ,fake vin,upgrade online,return to mine vin..i can't be able to have these Bmw apps.But now i installed my Vin and i haven't anymore navigation,is it in the menu but is grey,not selectable.Start only after reboot but after few seconds it says "not avaible at the moment...."
What's happens?
If i check fsc status i have:

read the state from "2" ECU(s)
......



HU_ENTRYNAV(DiagAddress=99(0x63))
WBA3B1101DF385788
RootCertStatus not avaible
SWSigStatus accepted
SWTApplications
........

do i loose my fsc?
Thank you for help me
Best regards
Luca
F31 10/2014

[steve@codemybimmer]

when you go to fsc extended and you check the FSC status, what do you get for App ID 222? If it's deactivated then you have a big problem.

[marenco35]

i kept open the page of esys,so for what i can read with laptop offline,i haven't app id 222,it stops at app id 221
Thank you

p.s. i have entrynav,not nbt i mean navibusines 606 not prof.609

[shawnsheridan]

Originally Posted by marenco35

i kept open the page of esys,so for what i can read with laptop offline,i haven't app id 222,it stops at app id 221
Thank you

p.s. i have entrynav,not nbt i mean navibusines 606 not prof.609

What is the FSC Status of AppID 201 (C9) and AppID 223 (DF)?

[marenco35]

Hello...


....
AppId 201 (0xC9)
UpgradeIndex 1 (0x01)
SWIType SWTclassic light
FSCStatus rejected
FSCCertStatus not avaible


AppId (0x
UpgradeIndex 1 (0x01)
SWIType SWTclassic light
FSCStatus rejected
FSCCertStatus not avaible


hoping to have not to much bad news

Thank you
Luca

[shawnsheridan]

Originally Posted by marenco35

Hello...


....
AppId 201 (0xC9)
UpgradeIndex 1 (0x01)
SWIType SWTclassic light
FSCStatus rejected
FSCCertStatus not avaible


AppId (0x
UpgradeIndex 1 (0x01)
SWIType SWTclassic light
FSCStatus rejected
FSCCertStatus not avaible


hoping to have not to much bad news

Thank you
Luca

Rejected is a whole lot better than Cancelled. The VIN in Head Unit is not right. Set it back to car VIN and FSC Codes should return to status Accepted.

[marenco35]

I checked right now in the car,i wrote a wrong thing in my first post
now i have:

HU_ENTRYNAV(DiagAddress=99(0x63)
WBA3K91090F912999
RootCerStatus not avaible
SWSigStatus accepted
SWTApplications

this VIN it's of my car


I have to change anything?
Thanks
Luca

[shawnsheridan]

Originally Posted by marenco35

I checked right now in the car,i wrote a wrong thing in my first post
now i have:

HU_ENTRYNAV(DiagAddress=99(0x63)
WBA3K91090F912999
RootCerStatus not avaible
SWSigStatus accepted
SWTApplications

this VIN it's of my car


I have to change anything?
Thanks
Luca

With WBA3K91090F912999 in FA, VO Code HU_ENTRYNAV, and see if FSC Status changes to Accepted.

[marenco35]

ok,so in few steps,to be sure to make right thinhgs...
1)expert mode,coding,=>read i must have in FA/FAZufrag/Header=>vinlog mine VIN
2)read SVT and code only HU_ENTRYNAV and then check FSC Status

is it correct?
Thanks
Luca

[shawnsheridan]

Originally Posted by marenco35

ok,so in few steps,to be sure to make right thinhgs...
1)expert mode,coding,=>read i must have in FA/FAZufrag/Header=>vinlog mine VIN
2)read SVT and code only HU_ENTRYNAV and then check FSC Status

is it correct?
Thanks
Luca

Yes.

[marenco35]

Hello.i code hu_entrynav but the check FSC status is always ,at 201 223 ,rejected.......what do you think ?
Thanks
Luca

[shawnsheridan]

Originally Posted by marenco35

Hello.i code hu_entrynav but the check FSC status is always ,at 201 223 ,rejected.......what do you think ?
Thanks
Luca

I don't know. Somehow your Head Unit VIN / FSC Code VIN is mismatched, which is why they are being rejected.