11-27-2018, 01:47 PM | #1 |
Major
482
Rep 1,469
Posts |
Will these wheels fit?
I currently have 19x9.5 et 35 in the rear on my lowered 435. It fits perfect.
Will 19 x 10 et 41 fit? it sits closer to the brakes, suspension. It will sit exactly the same at the fender. It will have a 265/35/19 tire. Will there be too much stretch? Also will having an 8.5 front with a 10 rear create too much under-steer? I am not sure I can get a 9" wheel up front to work with my setup considering i have x-drive. Has anyone done this?
__________________
2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18
2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85 Last edited by Insane435; 11-27-2018 at 02:54 PM.. |
11-27-2018, 05:54 PM | #2 |
Brigadier General
3132
Rep 4,380
Posts |
the tires sizes that you put on the rims will determine how it will handle.
comparing 19x9 +35 to 19x10 +41. the 10" is 12.7mm wider but the offset is 6mm higher so the actual rim lip of the 10" will be (12.7-6) 6.7mm further out. the shoulder of a 265 on the 10" will be just 1mm further out due to the mild stretch of a 265 on 10". 437M wheels are 19x9 +29, 19x10 +40 and are of similar specifications to the wheels you're considering, so you can get a feel for the fitment by looking through this thread and other 437M threads/posts https://f30.bimmerpost.com/forums/sh...ht=437m&page=9 in post #181, JTBazz has 235/40, 265/35 and in post #201 YNWABimmer has 245/35/ 285/30. they both have x-drives. in theory the relative understeer will be about the same as OEM with wider tires providing more overall total grip. |
Appreciate
1
Insane435481.50 |
Post Reply |
Bookmarks |
|
|