07-30-2021, 06:24 AM | #397 |
Registered
0
Rep 1
Posts |
Hi,
I do have F31 05/2014 With DSC MK100 When I bought car, I did receive RDC failure message. Thought that reason was missing sensors in wheels, so I decided to buy wheel sensors. (6855539) After installing them I still get RDC message. So that means that I did buy wrong sensors? Or I do need some coding to make them work ? As sensors arn't cheap to change is there any other options? like adding RDC module (near diff with wiring)? And will it not conflict with DSC MK100? And isn't that some kind a downgrade? - Thanks in advance. |
Appreciate
0
|
01-17-2022, 08:08 AM | #398 |
New Member
0
Rep 9
Posts |
Hi, first of all compliments to all of you for this topic and this forum on which I always find brilliant ideas!
Then, I have a F20 12/2012 without TPS and I would like to retrofit it. As far as I've understood from realoem, on the F20 there should not be present this module but, reading the thread, it seems that many of you were able to achieve this retrofit. It is almost everything clear except how to wire the new module: I've read that many of you were able to create your own harness but nobody has explained how. I mean, the pinout has been already reported in one of the first messages but where did you get the connector? Many thanks for your great support |
Appreciate
0
|
06-12-2022, 05:46 AM | #400 |
Enlisted Member
37
Rep 37
Posts |
The key thing is Radio Remote Control Receiver
If your car was produced before 2014/03, you need to change the Remote Control Receiver, and because it's replaced, the frequency of your fob keys is also changed, this means your fob keys won't work, so you need to make a new fob key. here's the steps,
Get 1). 4 TPMS sensors Replace 2). the Remote Control Receiver upto latest VO code 2VB. |
Appreciate
0
|
06-27-2022, 10:03 AM | #401 |
Enlisted Member
4
Rep 45
Posts |
Hi,
I had my F30 340i prod. 03-2018 retrofitted with TPMS sensors through local workshop by simply adding tire sensors and doing some coding back in 2019. They work since then without any problem. Now, i am expecting full car update at dealership due to factory recall and i would also expect TPMS coding to be cleared afterwards. I am preparing myself to recode necessary parameters using ESYS and ENET cable, I loaded current FA from car and was expecting to see 2VB already present in vehicle order, however it is not! Any explanation for that? Thanks! |
Appreciate
0
|
07-11-2023, 10:26 PM | #402 |
Second Lieutenant
28
Rep 208
Posts
Drives: bmw 428xi
Join Date: Oct 2022
Location: Los Angeles
|
I have a 2015 428xi (shitty Canadian edition). How complicated would it be to retrofit from FTM to TPMS?
|
Appreciate
0
|
10-19-2023, 09:10 AM | #403 | |
Registered
0
Rep 2
Posts |
Quote:
What setup do I need? 6876227 and 6856227? 6855180 and 6798872? |
|
Appreciate
0
|
02-01-2024, 02:31 PM | #404 |
Enlisted Member
7
Rep 42
Posts |
THANK'S TO THIS THREAD I'VE MANAGED TO fully retrofit the 227 RDC module paird with 873 wheel sensors, on a 330Xd from 2013 !
the 227 module was SH from an F07 2015, coded and programed with Esys. Everything tested before and after, no errors.... Posting this just to say THANKS !!! https://youtu.be/rE6kPiOHYOw
__________________
Smile More
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|