[Dr Forinor]

I've tried searching but I couldn't the answer.

Can someone please post up how to code EBT via Bimmercode?

I have the NBT, Pro Nav.

[Dr Forinor]

Sorry all, just found it

http://f30.bimmerpost.com/forums/sho...&postcount=126

[ByTheSea]

Deleted. See post 18.

[Maxwell_RS]

Did this via bimmercode with codes from the apps producer. Didnt work and iDrive messed up. Not worth it

[ByTheSea]

Originally Posted by Maxwell_RS

Did this via bimmercode with codes from the apps producer. Didnt work and iDrive messed up. Not worth it

I also used the codes from the apps producer, the list above is simply a rework of his list after thorough checking against my car.
Worked for me. So yes, worth it.

[Maxwell_RS]

Originally Posted by ByTheSea

I also used the codes from the apps producer, the list above is simply a rework of his list after thorough checking against my car.
Worked for me. So yes, worth it.

That list is code for code the exact list i got from Stefan and did work for my NBT ProNav. But messed up my iDrive. So no its not worth messing up an iDrive system for the sake of some generic coding via an app. Best going the proper coding route

[ByTheSea]

I don't think I'm alone in using that list with no reported problems. So I'll leave it to others to use at their discretion where they have the same car and HU I specified in my post.

[Hooded]

Problems with the idrive seems most common issue after using BimmerCode so I've stayed clear of coding anything on the head unit. No problems so far doing a few bits of coding on other modules for me.

[MarkG_M5Comp]

OP has history of things messing his car up

Go for it - what can possibly go wrong?!

[Dr Forinor]

Originally Posted by MarkG_M3CP

OP has history of things messing his car up

Go for it - what can possibly go wrong?!

Me? I don't think so?

[ByTheSea]

Originally Posted by Dr Forinor

Me? I don't think so?

...and not me, so who?

[MarkG_M5Comp]

Originally Posted by Dr Forinor

Me? I don't think so?

Apologies - I thought you'd had some issues with a remap...

Clearly I was wrong so even less reason to avoid the EBT coding - just do it.

As you were

[muffking]

I'm glad I did mine before this thread appeared, otherwise it may have talked me out of it.
I now have EBT on my NBT Pro Nav and everything else still works

[Mr Whippy]

How can I check if I have EBT?

I have two roof microphones and pretty certain I can have two phones take calls at the same time... and I get iPhone music artwork appearing on the display when it’s playing via BT...
... but I don’t have the USB under the radio controls... and an online vin/chassis code checker said my car didn’t have it.

[muffking]

Sounds like you have it. You don't need USB under the radio to have it.
Is there a previous owner who could have coded it?

[Mr Whippy]

The first owner was BMW, a sub-business thing, looked up and they manage the import storage locations for BMW, so unlikely they coded it.

I just tried to buy Apple Play and it wouldn’t let me, so given I have pro nav I’m curious what I’m missing (EBT afaik)


I might have to buy Bimmercode and take a look what’s what.

[Wibbles]

Originally Posted by Mr Whippy

The first owner was BMW, a sub-business thing, looked up and they manage the import storage locations for BMW, so unlikely they coded it.

I just tried to buy Apple Play and it wouldn’t let me, so given I have pro nav I’m curious what I’m missing (EBT afaik)


I might have to buy Bimmercode and take a look what’s what.

carplay is still possible as long as you have NBT EVO system.

[ByTheSea]

The EBT coding solution that I posted in post #3 proved unreliable in that I could not get two phones to consistently connect simultaneously. So I backed out and tried a solution from a German site...

HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > AUDIO_OFFSET = aktiv
HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > MICROPHONE_NUMBER = wert_2
HU_NBT > EXBOX 3001 > USB_AVAILABLE = aktiv
HU_NBT > HMI 3000 > CDMM_USB_AUDIO = all
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > SOFTWARE_UPDATE_ASSISTANT = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ADRESSBOOK = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_CAR_TYPE_IPOD_LOGO = bmw
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_MP4_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_PLAYER_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HFP = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BT_MODUL_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACTS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > DATACOMM_CSIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_METADATA = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EXTERNAL_CALL_LISTS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_CONFERENCE_CALL = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_TYPE = internal_phone
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SMS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SWUP_SOURCE_USBMSCDD = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv

This seems to be a broadly adopted solution but I cannot get two phones simultaneously active. One connected, the other paired in any combination of the two. With each phone having BT streaming when connected.
I'm coming to the conclusion this is not possible using Bimmercode with the HU_NBT unit.

[muffking]

Originally Posted by ByTheSea

This seems to be a broadly adopted solution but I cannot get two phones simultaneously active. One connected, the other paired in any combination of the two. With each phone having BT streaming when connected.
I'm coming to the conclusion this is not possible using Bimmercode with the HU_NBT unit.

Without heading back through my posts on different threads, there is a way. I did my NBT Pro Nav via Bimmercode on my iPhone. I can have 2 phones paid for streaming and/or phone calls.

I usually select my work phone to calls via the Tel button on the iDrive controller and my personal phone for audio books via the Media button, selecting Bluetooth as the media feed.

[ByTheSea]

Originally Posted by muffking

... I usually select my work phone to calls via the Tel button on the iDrive controller and my personal phone for audio books via the Media button, selecting Bluetooth as the media feed.

Thanks, that's not the solution I'm searching for. I want two phones simultaneously connected for incoming/outgoing calls. So far I have not achieved that reliably (in fact with the latest coding not at all, but at least it's stable in all other respects), despite others claiming to have done so. In all other respects EBT is working for streaming from either phone. It may be significant that I have Business Nav, not Pro Nav.

[muffking]

Originally Posted by ByTheSea

Thanks, that's not the solution I'm searching for. I want two phones simultaneously connected for incoming/outgoing calls. So far I have not achieved that reliably (in fact with the latest coding not at all, but at least it's stable in all other respects), despite others claiming to have done so. In all other respects EBT is working for streaming from either phone. It may be significant that I have Business Nav, not Pro Nav.

Just been out to check as I've not tried using both phones for calls before.
You're absolutely right, as mine also can have both phones connected but only 1 as Telephone and 1 for Streaming, not both for Telephone or both for Streaming. You literally have to select between them.

Shame, as I would also find that quite handy for when the wrong phone rings.

[ByTheSea]

You appear to be in advance of me. I can only connect 1 phone, the other is shown as paired. When it's working as I desire if you go into Configure Device the telephone will have options "Telephone 1" and "Telephone 2". 1 means it's used for outgoing calls and can receive incoming, 2 means it can receive incoming. These options are not presented in my iDrive, only "Telephone 1" and only one phone can be active/connected at any time. You have to manually swap between them. I'm stuck for a solution as I have investigated in depth and tried every published solution.