[kitster]

Hi, I've a semi successful evening coding. At one point I accidentally hit the 'Code Default Values' button, when the iDrive restarted I lost a load of functions inc telephone! Lucky I restored and everything is back in it's right place.

Anyway I wanted to added BMW Live, I followed the instructions that demge01 used (enable ONLINE_BROWSER_LIVE), I get the option and the service starts up but it's taking ages to start. I waited 10+ mins for Live to start and in the end it said: "Current mobile communication network is not supported by BMW Live" , I had my iPhone BT to the car.

Anyone know if I need to enabled something else?

Thanks.

[shawnsheridan]

Originally Posted by kon

thanks, I'll try reloading the saved FA from my PC then.

I move from FA editor to Coding, and esys prompted to reload the FA, which I click yes, and I saw the file pre-loaded in the Coding screen, and seeing that the option i want to get rid off is no longer there, so i proceeded to code, which went well.

Just don't understand why the vehicle FA was updated as well since I didn't write the modified FA back to the car

If you didn't write the change to the car, then it is impossible to read that change back from the car. Maybe in the midst of it all you just contused the car VO with your modified VO.

[tristras]

Last night I lost power while coding the FEM_01 module, today when I try to read the coding data I get this error:
ransaktions-Report: Aktion: Codierdaten lesen


FEM_BODY [40] [ˇˇˇˇˇˇˇ]
readCPS o.k.
cafd_ffffffff-255_255_255 Fehler:
File for "cafd_ffffffff-255_255_255" not found! [C012]


I have the original file, how I can restore it?

Any help will be appreciated.

[shawnsheridan]

Originally Posted by tristras

Last night I lost power while coding the FEM_01 module, today when I try to read the coding data I get this error:
ransaktions-Report: Aktion: Codierdaten lesen


FEM_BODY [40] [ˇˇˇˇˇˇˇ]
readCPS o.k.
cafd_ffffffff-255_255_255 Fehler:
File for "cafd_ffffffff-255_255_255" not found! [C012]


I have the original file, how I can restore it?

Any help will be appreciated.

You need to add the CAFD back to FEM_BODY and VO Code the ECU:

Connect => Read FA => Activate FA => Read VCM => Left-Click on FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

To determine your I-Level, go to VCM Module => VCM Master Tab => click Read under I-Steps. The I-Step (current) is the one you want to match when you select the CAFD from the "Detect CAF for SWE" options (e.g. F020-12-11-502).

[tristras]

Originally Posted by shawnsheridan

You need to add the CAFD back to FEM_BODY and VO Code the ECU:

Connect => Read FA => Activate FA => Read VCM => Left-Click on FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

To determine your I-Level, go to VCM Module => VCM Master Tab => click Read under I-Steps. The I-Step (current) is the one you want to match when you select the CAFD from the "Detect CAF for SWE" options (e.g. F020-12-11-502).

Thank you I will try this during the day.

[avgor123]

Originally Posted by shawnsheridan

I would reset the ECU (VO Code) and try it again from scratch. It should work just with those 3 codes, and by changing only the drop-downs.

Thanks.
I tryed do it again, reset ECU to VO and change those 3 codes by drop-downs.
It's not working.
I think it is because of russian localisation...
I need a .NCD file from E30 with working passenger SBR to compare with my .NCD file.

[shawnsheridan]

Originally Posted by avgor123

Thanks.
I tryed do it again, reset ECU to VO and change those 3 codes by drop-downs.
It's not working.
I think it is because of russian localisation...
I need a .NCD file from E30 with working passenger SBR to compare with my .NCD file.

You mean from an F30, not E30?

Does this car have factory Comfort Access with the door handle ridges?

[avgor123]

Originally Posted by shawnsheridan

You mean from an F30, not E30?

Does this car have factory Comfort Access with the door handle ridges?

Sorry, I mean F30, of course.
My car doesn't have Comfort Access.

[shawnsheridan]

Originally Posted by avgor123

Sorry, I mean F30, of course.
My car doesn't have Comfort Access.

Sorry, I was thinking of something else.

[shawnsheridan]

Originally Posted by avgor123

Thanks.
I tryed do it again, reset ECU to VO and change those 3 codes by drop-downs.
It's not working.
I think it is because of russian localisation...
I need a .NCD file from E30 with working passenger SBR to compare with my .NCD file.

Ok. We will try it another way.

Try adding K-Wort OI12 to your VO under the FA HO-Wort Section, then calculate FP and make sure it appears to the right under Aftermarket_Fitment, then Save FA, Load the FA, then VO Code CAS and FRM.

[avgor123]

Originally Posted by shawnsheridan

Ok. We will try it another way.

Try adding K-Wort 0I12 to your VO under the FA HO-Wort Section, then calculate FP and make sure it appears to the right under Afttermarket Fitment, then Save FA, Load the FA, then VO Code CAS and FRM.

Shawn, I have factory installed non-active passenger SBR (it's default for Russia). I want to activate passenger SBR instead of that.

I haven't an OI12 option in K-Words folder.

[shawnsheridan]

Originally Posted by avgor123

Shawn, I have factory installed non-active passenger SBR (it's default for Russia). I want to activate passenger SBR instead of that.

I haven't an OI12 option in K-Words folder.

Sorry. I thought you were trying to disable it, not enable it.

Still, very strange that with all 3 codes aktiv, it does not work.

What about adding option 845 to your VO if it is not there, and then VO Coding CAS and FRM?

[kon]

Originally Posted by avgor123

Shawn, I have factory installed non-active passenger SBR (it's default for Russia). I want to activate passenger SBR instead of that.

I haven't an OI12 option in K-Words folder.

I've been trying as well, no luck, and gave up

[avgor123]

Originally Posted by shawnsheridan

Sorry. I thought you were trying to disable it, not enable it.

Still, very strange that with all 3 codes aktiv, it does not work.

What about adding option 845 to your VO if it is not there, and then VO Coding CAS and FRM?

I have 845 option in VO. SBR is working for driver (acoustic and display warnings), but not for passenger...

[mocohead]

I'm trying to read trouble codes and I am getting an error message saying error_ecu_general_reject when trying to run f01

Any thoughts?

Thanks

[shawnsheridan]

Originally Posted by avgor123

I have 845 option in VO. SBR is working for driver (acoustic and display warnings), but not for passenger...

Very strange. I give up.

[shawnsheridan]

Originally Posted by mocohead

I'm trying to read trouble codes and I am getting an error message saying error_ecu_general_reject when trying to run f01

Any thoughts?

Thanks

Are you using Tool32? Which .PRG and job?

[avgor123]

Originally Posted by shawnsheridan

Very strange. I give up.

I think that problem is relating to probable absence of passenger sensor mat in cars made for Russia (there is not S230A option in VO).

http://en.bmwcats.com/bmw/catalog/F3...cs/65/65_2369/


If I set Sitzpositionssensor_Beifahrer to active I see an error of the passengеr's SRS on iDrive and instrument cluster.

[tristras]

Originally Posted by shawnsheridan

You need to add the CAFD back to FEM_BODY and VO Code the ECU:

Connect => Read FA => Activate FA => Read VCM => Left-Click on FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

To determine your I-Level, go to VCM Module => VCM Master Tab => click Read under I-Steps. The I-Step (current) is the one you want to match when you select the CAFD from the "Detect CAF for SWE" options (e.g. F020-12-11-502).

Thank you Shawn, I was able to add the CAFD to that module, now I can close my windows with the keyfob.

I coded the TPM but only see the psi and degrees lables not the values, should I try again? Also the Inband ringing is not working.

[shawnsheridan]

Originally Posted by tristras

Thank you Shawn, I was able to add the CAFD to that module, now I can close my windows with the keyfob.

I coded the TPM but only see the psi and degrees lables not the values, should I try again? Also the Inband ringing is not working.

For TPMS to work, you need option 2VB. Do you have it?

Inband Ringing is phone specific. Not all phones work.

[Frogman]

Originally Posted by tristras

Thank you Shawn, I was able to add the CAFD to that module, now I can close my windows with the keyfob.

I coded the TPM but only see the psi and degrees lables not the values, should I try again? Also the Inband ringing is not working.

The TPM values only show when you're driving. The values will show up after about a minute.

If they still don't show after that, the you don't have the TPMS sensors and you are SOL.

I've only seen in-band ringing on an F30 if you have an iPhone. It does not work on Android.

[tristras]

Originally Posted by shawnsheridan

For TPMS to work, you need option 2VB. Do you have it?

Inband Ringing is phone specific. Not all phones work.

These are the only 2* values I have, I guess I will have to accept that I can only have the green indicators on the TPM screen.

S205A AUTOMATIC GETRIEBE Automatic transmission
S216A SERVOTRONIC HYDRO STEERING-SERVOTRONIC
S240A LEDERLENKRAD Leather steering wheel
S248A LENKRADHEIZUNG Steering wheel heater
S249A MULITFUNKTION FUER LENKRAD Multifunction f steering wheel
S258A BEREIFUNG MIT NOTLAUFEIGENSCHAFTEN Tire with run-flat functionality
S2DXA 17"LM RAEDER STERNSPEICHE 394 BMW LA wheel, Star Spoke 394

My phone is an iPhone, but I noticed that there is also an Inband_Ringing function on the Combox_media that I didn't activate, Will try tomorrow.
Thank you